Cart 2 india

Specification
Brand : Eaton (Moeller), Bonn
BulletPoint1 : Latching switch: Push it, ON; Push it again, OFF. 100% Brand new and high quality, mechanical life for 500,000 cycles. Degree of protection: IP67, IK10
BulletPoint2 : Mounting hole size: 16mm; Head Diameter: 18mm; Head shape: Flat; Enclosure material: Metal
BulletPoint3 : Switch rating: 5A/250V; LED rating: 15mA, AC/DC 12V; LED color: Red, Blue; The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it.
BulletPoint4 : Widely used in for various additional electric equipment, relay, computer, inside & outside the car or any circuit controls.
BulletPoint5 : Package include: 1 x Push button switch(Two-colors LED), 1 x Wire socket plug
CircuitType : 2-way
Color : black
ConnectivityProtocol : X-10
ConnectorType : Solder
ControllerType : Push Button
ControllerType1 : Push Button
ControllerType2 : Ring
ControlMethod : touch
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier1 : 4015082165185
ExternallyAssignedProductIdentifier2 : 04015082165185
FitType : Universal
InternationalProtectionRating : IP65
ItemName : Eaton Moeller Wahltaster M22-WRK/K10 2-Way Flush Mount Black Push Button Manual Switch
ItemPackageDimensions_Height : 12.1 centimeters
ItemPackageDimensions_Length : 2.3 centimeters
ItemPackageDimensions_Width : 6.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
Manufacturer : Eaton (Moeller)
Material : Brass
ModelNumber : 216518
MountingType : Flush Mount
NumberOfItems : 1
NumberOfPositions : 2
OperatingVoltage : 250 volts
OperationMode : manual
PackageLevel : unit
PartNumber : 216518
ProductDescription : Introduction:
100% Brand New and High Quality. It is a perfect choice if you are in need of a heavy duty push button! This switch is a very tough, small, panel-mount Latching switch with Two-Color LED. It can be used for basic On/Off functions perfectly. The switch is rated up to 5A and 250VAC while the LED is rated for 3-12V. It comes with the wire connector, you don't need to solder the terminals, make fitting very easy.

Widely Use
Widely used in various additional electric equipment, relay, computer, inside & outside the car or any circuit controls -- any application you can think of! The switch is IP67 rated, it is also an anti dust and waterproof one which makes it great for outdoor use.

Specification:
- Tail configuration: Connection terminal(2.8 X 0.5)
- Switch Rating: 5A/250VAC
- Contact resistance: ≤50mΩ
- Insulation resistance: ≥1000mΩ
- Dielectric intensity: 2000VAC/min
- Operation Temperature: -20℃ ~ +55℃
- Mechanical life: 500,000 cycles
- Electrical life: 50,000 cycles
- Panel thickness: 1 - 10mm
- Operation pressure: About 3 - 5N
- Operation stroke: About 3mm
- Protection level: IP67, IK10
- Mounting Cut Hole: 16mm
- Head Diameter: 18mm
- Operation Type: Latching
- Switch Contact: 1NO 1NC
- LED Rating: 15mA, AC/DC 12V
- LED Pattern: Ring
- LED Color: Red and Blue
- Contact Material: Silver alloy
- Button Material: Stainless Steel
- Socket Plug Length: 16cm/6.3"

Packing Include:
1 x push button switch(Two-colors LED)
1 x socket plug

Note:
- The switch come with a rubber O-ring which makes it splash resistant but it can NOT be submerged underwater.
- Don't let current go above 5A, or the switch will get warm and to be burned out.
ProductSiteLaunchDate : 2014-11-12T22:21:10.552Z
Size : Latching
SpecificationMet : Etl, Culus, Ip65
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Mechanical
TerminalType : Screw
UnitCount : 1
UnspscCode : 39122200