Cart 2 india

Specification
Brand : Avanti
BulletPoint1 : Pneumatic Push Connect Tube to NPT Elbow Fitting
BulletPoint2 : Valve Ends: Tube OD 5/32" or 4mm to NPT 1/8"
BulletPoint3 : Material: Plastic Body: PBT (Polybutylene terephthalate); Metal Body: Nickel Plated Brass
BulletPoint4 : Operating Pressure: 0 - 150 PSI 0 - 990 kpa. Operating Temperature: 0 - 60 °C 32 to 140F
BulletPoint5 : Package Quantity: 1
ConnectorType : Elbow
ExteriorFinish : Metal,Plastic
ExternallyAssignedProductIdentifier1 : 0754291487520
ExternallyAssignedProductIdentifier2 : 754291487520
FitType : Universal
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Length : 3.7 centimeters
ItemDisplayWeight : 11.8 grams
ItemName : Avanti 1/2" tube to 3/8" male NPT Connector for drinking water filter RO reverse osmosis - 1/2" tube x 3/8" male NPT, quick-connect fittings - QF-MC0806 (Pack of 1)
ItemPackageDimensions_Height : 10.2108 centimeters
ItemPackageDimensions_Length : 0.0762 centimeters
ItemPackageDimensions_Width : 7.6708 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : Avanti Membrane Technology
Material : Plastic
ModelNumber : QF-MC0806
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : QF-MC0806
ProductDescription : "

Applications
· Reverse Osmosis Systems
· Drinking Water Filtration Systems
· Water Coolers
· Coffee Machines
· RVs
· Misting Systems
· Point-of-Use Filtration Systems
· Beverage Dispensers
· Ice Makers

Food-Grade Quality
· Our fittings are produced with food-grade material and can be used in food and drinking water applications

Portable Water Applications
· Our fittings are suitable for potable water applications with a maximum chlorine concentrate of 4 ppm
· Direct exposure to sunlight will reduce fittings service life and may lead to failure
· All fittings and tubing should not be used near heart emitting appliances
· For cold water applications only

Technical Specifications
· Body: made of food-grade Polyacetal and Polyoxy Methylene
· O-ring: Nitrile (NBR)
· Collet: Polyoxy Methylene and stainless steel
· Working Pressure and temperature Range: Maximum 150 psi @ 70°F (10.3 bar @ 21°C) / 60 psi @ 140°F (4.1 bar @ 60°C); Minimum 33°F (1°C)

Installation and Testing
· Fittings and tubing installations should be inspected by pushing and pulling on the connection points and be pressure-tested prior putting into service
· Fittings should not be exposed to excessive side loads and caution should be taken to prevent undue stress and excessive side loading

"
ProductSiteLaunchDate : 2018-12-02T18:51:46.835Z
UnitCount : 1
UnspscCode : 40142000