Cart 2 india

Specification
Brand : beduan
BulletPoint1 : ✅Size: Male Elbow/ Size:1/4" Tube OD x 1/8" NPT Thread
BulletPoint2 : ✅Working Pressure:0-1.0MPa | 0-150psi/ Applicable Tube:PU/PA/PE/PVC
BulletPoint3 : ✅Working Temperature:0-60°C | 32～140°F
BulletPoint4 : ✅Material:Plastic and copper
BulletPoint5 : ✅Fluid Type:Air or Vacuum (no freezing)
Color : Black
ConnectorType : Elbow
Department : unisex-adult
ExteriorFinish : Copper
ExternallyAssignedProductIdentifier : 6919817991125
GpsrSafetyAttestation : 1
IncludedComponents : 5PCS 1/4" D.O.T AIR LINR FITTINGS
ItemName : Beduan Male Elbow 1/4" Tube OD x 1/8" NPT Male Push to Connect Fitting Pneumatic Air Fitting Thread Adapter (Pack of 10)
ItemPackageDimensions_Height : 12.192 centimeters
ItemPackageDimensions_Length : 1.8034 centimeters
ItemPackageDimensions_Width : 8.6106 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : Beduan
Material : Copper
Material1 : Plastic
Material2 : Copper
ModelName : 1/4" push to connect fittings
ModelNumber : PL-1/4-N1
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : 12401-npl
ProductDescription :

Product Parameter

Size: 1/4" Tube OD x 1/8" NPT

Shape: Male Elbow

Material: Plastic and copper

Working Temperature:32～140°F

Fluid Admitted: Air

Max Working Pressure: 0~145Psi

Applicable: Pipe PU/PA/FEP/PFA

Installation Method

1. Before installation, make sure that the cutting surface of the tubing is vertical, there is no scar around the tube and the tube is not oval.

2. When inserting the connector, it must be inserted at the bottom of the connector. If the pipe is not inserted in the end, it may cause air leakage.

3: After the pipe is connected and installed, pull the tube to make sure that the tube cannot be pulled out.

4: When removing the air pipe, press the connector clamp into the tube with thumb, and gently pull out the pneumatic pipe with force.

5: After installation, The Tube Can Rotate 360° to adjust the connector direction.

6: After repeatedly pulling out the pneumatic tube.The top frayed part should be cut off.Continue to use after trim.

ProductSiteLaunchDate : 2022-01-08T08:37:59.104Z
Size : 1/4"OD-1/8"NPT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 40141700