IVLPHA Push to Connect Fitting 1/8" Tube OD, Pneumatic Air Water Bulkhead Union Two Way Connector/Coupler (Pack of 4)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 3400/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : IVLPHA
BulletPoint1 : Quick installation, simple and flexible, space-saving. Even after installation, the direction of tubing can be changed freely.
BulletPoint2 : Stainless steel locking claw, never stuck, never rust.
BulletPoint3 : Smooth thread smooth rotating.
BulletPoint4 : Fit for icemaker, refrigerator, cold water filter, etc. Please do not apply for the tube joint with additional external load (bending, twist or pulling, e.g.: Trailer, Air Suspension).
BulletPoint5 : Pressure Range: 0~1.1Mpa(0-160psi), Negative Pressure: -100Kpa (-29.5 in.Hg), Pressure Proof Test: 3.0Mpa (435psi), Temperature Range: 0~60℃ (32~140℉), Applicable Tube: Nylon,Polyamide (PA) / Polyurethane (PU). Applicable Fluid: Air, Vacuum, Water.
BulletPoint6 : QUICK CONNECT TECHNOLOGY: Our handy push-to-connect system allows for quick connection and disconnection of the water line when required
BulletPoint7 : SPECS: 3/8 inch male and female compression fittings OR 1/2 male and female compression adapters x 1/4 inch OD quick connect water outlet
Color : White
ConnectorType : Union
ExteriorFinish : Stainless Steel
ExteriorFinish1 : Nickel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier1 : 0751713241777
ExternallyAssignedProductIdentifier2 : 751713241777
GpsrSafetyAttestation : 1
IncludedComponents : CONNECTOR,TUBING
IncludedComponents1 : 3/8" x 3/8" x 1/4" Angle Stop Valve
IncludedComponents2 : 3/8" to 1/2" Male Adapter
IncludedComponents3 : 3/8" to 1/2" Female Adapter
ItemDisplayWeight : 0.56 ounces
ItemName : IVLPHA Push to Connect Fitting 1/8" Tube OD, Pneumatic Air Water Bulkhead Union Two Way Connector/Coupler (Pack of 4)
ItemPackageDimensions_Height : 12.3 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 7.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : IVLPHA
Material : Polybutylene Terephtalate (PBT) and Nickel Plated Brass
ModelName : M
ModelNumber : 02
NumberOfItems : 10
NumberOfPieces : 4
PartNumber : M02
ProductDescription :
Before use, it should make clear following points

Warning

a) Except air and water (only special type and custom-design, e.g.: icemaker, refrigerator, cold water filter), never attempt to use the tube joint other fluids.
b) The tube joint application is prohibited where spark and fire might be occurred.
c) The tube joint application is prohibited if water temperature is above 60℃ (140℉) because resin might be decomposed and damaged in water under a high temperature.
d) The tube joint is not designed for application where there is static charge.
e) Never apply tube joint with additional external load (bending, twist or pulling, e.g.: Trailer, Air Suspension),

Cautions

1) If you use other supplier tubing, the different tubing tolerance might case leakage or incorrect connection and disassembly. It must check if tubing OD is measured by Metric Size or Inch Size.

2) Always check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch. Please refer to following instruction in connection of tubing. When you insert the air tubing into the joint, you will have two-step feeling. Section One is locking claw while Section Two is sealing ring. You must insert the tube into Section Two.

Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is convenient in assembly and disassembly. After connection of tube joint and tubing, always try to pull tubing and ensure its firm connection.

3) Cautions during disassembly of tubing before disconnection of tubing, always check tubing internal pressure for zero.

For disconnection of tubing, always press sleeve heavily and then pull out tubing. If sleeve is net pressed with enough force, it is hard to pull out tubing and external surface scratch might be resulted by locking claw, which is the cause of air leakage.

ProductSiteLaunchDate : 2023-04-17T01:05:51.273Z
Size : 1/8 inch - 1/8 inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4
UnspscCode : 40141700

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.