Cart 2 india

Specification
Brand : Parker Hannifin
BulletPoint1 : Compact one piece fitting
BulletPoint2 : Swivels on all Male threaded shapes for assembly in tight places and for precise positioning
BulletPoint3 : Pre-applied white acrylic sealant
BulletPoint4 : Corrosion resistance
BulletPoint5 : Push-to-connect for fast assembly and disassembly
Color : White
ConnectorType : Tube Push-to-connect X Nptf Male
ExteriorFinish : Brass
ItemName : Parker Hannifin W169PLP-4-2 Prestolok PLP Nickel Plated Brass Male Elbow Swivel 90 Degree Push-to-Connect Fitting, 1/4" Push-to-Connect Tube x 1/8" Male NPTF
ItemPackageDimensions_Height : 10.0076 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 2.9972 centimeters
ItemPackageQuantity : 1
ItemShape : 90° Elbow Swivel
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : Parker Hannifin Corporation
Material : Brass
Material1 : Plastic
Material2 : Nylon
ModelNumber : W169PLP-4-2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : W169PLP-4-2
ProductDescription : Product Features:
Product Name : push to connect fittings
Model : PCF8-04
Net Weight : 110g
Color : Gold Tone,Blue
Material : Plastic,Brass
Operating Pressure : 0-1MPa
Operating temperature：0 - 60 Degree Celsius;
Female Thread Type : G Type
Type: Female Straight Thread Connector
Thread Size : G1/2"
Tube Size (OD): 0.31" / 8mm
Dimension : 28mm x24mm / 1.1-inch x 0.94-inch (L x W）

Package Content:
4pcs x Quick Fittings

Description:
1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on one end and Female G threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.

Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.

ProductSiteLaunchDate : 2016-02-19T08:00:01.000Z
Size : 1/4 inches x 1/8 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40183100