Cart 2 india

Specification
Brand : DERPIPE
BulletPoint1 : Quick Connect Fitting Connector Type : 1/4" Tube OD x 1/4" NPT
BulletPoint2 : Quick Connect Fitting Material: plastic - stainless steel; seal O-ring: NBR; lock claw: stainless
BulletPoint3 : Quick Connect Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
BulletPoint4 : Plastic Push Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
BulletPoint5 : Plastic Push Fitting Fluid Type: air, vacuum; Operating Pressure: 0- 150 PSI / 0 - 9.9 kgf / cm2 (0-990kPa); Working Temperature: 32-140¡ãF / 0-60¡ãC; Applicable Tube: PU / PA / PE / PVC
ConnectorType : Elbow
ExternallyAssignedProductIdentifier1 : 698253849820
ExternallyAssignedProductIdentifier2 : 0698253849820
GpsrSafetyAttestation : 1
ItemName : Push to Connect Tube Fitting - Male Elbow 1/4 Tube OD x 1/4 NPT Thread Plastic Push Fit Fitting, Pack of 5
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 0.1524 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : DERNORD
Material : plastic-stainless steel
ModelNumber : QW1501475CA
NumberOfItems : 5
NumberOfPieces : 5
PartNumber : QW1501475CA
ProductDescription : With push to connect fittings, you can easily change the tubing connector direction. Narrow space is also suitable with the push.
Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily.
Plastic Push is widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical.
Plastic Push connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.

CAUTIONS:
1.Please do not use it for purposes other than fluids.
2.Please do not exceed the maximum use pressure when using.
3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint.
4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage.
5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage.
6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.
7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.

ProductSiteLaunchDate : 2018-05-14T07:00:00.000Z
Size : 1/4 to 1/4 inch NPT
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40141700