Cart 2 india

Specification
Brand : utah pneumatic
BulletPoint1 : Type:Push In Male Connector. Size:3/8 ”od tubing 1/4”NPT. Weight:18.5g od tubing air fitting quick release air line fittings
BulletPoint2 : Fluid Admitted:Air, Vacuum, air fittings (No Freezing)airline fittings
BulletPoint3 : Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:1.5.Mpa | 150 psi push fittings tube coupler airline quick connect
BulletPoint4 : Negative Pressure-100Kpa | -29.5 In Hg. Body:Nickel Plated Brass Seal, O-Ring NBR pushlock air fittings air fittings
BulletPoint5 : Working Temperature: 0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC tube connectors fitting ptc air fittings
Color : Silver
ConnectorType : Union
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 4602982413869
ExternallyAssignedProductIdentifier1 : 652827872317
ExternallyAssignedProductIdentifier2 : 0652827872317
ExternallyAssignedProductIdentifier3 : 00665626126673
GpsrSafetyAttestation : 1
IncludedComponents : Installation Guide
ItemLength : 32 feet
ItemName : Utah Pneumatic 3/8"Od 1/4" Npt Air Union Male Push-To-Connect Fittings - Straight Nickel-Plated Brass Air Line Connectors (5 Pack)
ItemPackageDimensions_Height : 9.9 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemShape : Elbow
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : utah pneumatic
Material : Brass
Material1 : Plastisol
Material2 : 6061-T6 aluminum alloy
MaximumVoltage : 600 volts
MeasurementSystem : Inch
ModelName : Plastic Push Male Adapter
ModelNumber : IPL250-4CB
NominalWallThickness : 0 inches
NumberOfItems : 1
NumberOfPieces : 5
NumberOfPieces1 : 10
NumberOfPieces2 : 5
OperatingVoltage : 600 volts
PackageLevel : unit
PartNumber : will
Pattern : pc 3/8 od 1/4 npt
ProductDescription : CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to check the external connectors surface for any scratch. You need to consider the following guidelines during installations Fix the air hose connector into the joint ; there are two sections around this region namely : 1 Locking claw 2 Sealing ring : it's important to insert the tube into this ring. Use sleeve for fittings connection and disconnection.Note that the sleeve is an oval shaped plumbing material that is essentially used for assembling and disbanding purpose. The round sleeve is available for any plumbing needs.On the other hand, there is limited space for the oval sleeve. Once the connection has been established ,pull the connectors to confirm their firmness. Use the right tool to tighten the external hexagonal and internal hexagonal parts of the tube fitting. It's crucial for you to use the approved torque on screws. The use of other types of torque can damage thread and further lead to leakages . Low quantity of torque can as well lead to loosen screw and leakages. Adjust the tubes direction after the screws have properly the tightened. In a situation where the adjustment is quite difficult to achieve,use the recommended torques to change the direction of the tubing.
ProductSiteLaunchDate : 2017-09-12T07:00:00.000Z
Size : 3/8 OD 1/4 NPT
SpecificationMet : UL
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureRating : 221 degree celsius
UnitCount : 1
UnspscCode : 40141700