Specification Brand : uxcell BulletPoint : Acetal has greater strength and heat resistance compared to polypropylene. The fittings are manufactured in acetal copolymer with food grade nitrile O-ring, making them especially suitable for applications involving foodstuff and potable liquids. They are also suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum. Material : Acetal BulletPoint1 : Product Size: 3/8" Tube OD x 3/8" NPT Female Straight Thread (Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter) BulletPoint2 : 360 Degrees Rotation Access: These straight-thread push-to-connect fittings offer a 360-degree rotation capability, ensuring a secure connection without air leakage and optimal performance during operation. BulletPoint3 : Brass Material: The push-to connector is constructed from brass for durability and wear-resistant with nickel plated for protection against rust and tarnish. The stainless steel spring increases clamp force efficiency and strength. BulletPoint4 : Compact Connection: With meticulous craftsmanship, clear thread structure, and a smooth surface free of burrs, these fittings provide a tight and leak-resistant connection. BulletPoint5 : These brass push-to-connect fittings are commonly used in pneumatic systems to connect air lines, valves, cylinders and other components. It can be used in fluid transfer, pneumatic systems, automotive and HVAC systems. BulletPoint6 : This product is not intended for use in potable water systems Color : silver tone ConnectorType : NPT Male ExteriorFinish : Brass ExternallyAssignedProductIdentifier1 : 605322965275 ExternallyAssignedProductIdentifier2 : 0605322965275 GpsrSafetyAttestation : 1 IncludedComponents : John Guest - Acetal Three-Way Divider Fitting 3/8" OD x 3/8" OD / Single - Grey ItemName : uxcell 2 Pack 3/8" NPT Female Straight Thread Push to Connect Fittings, 3/8" Tube OD x 3/8" NPT Air Shock Fittings Pneumatic Fittings (Silver Tone, PCF 010-03) ItemPackageDimensions_Height : 0.94 inches ItemPackageDimensions_Length : 5.51 inches ItemPackageDimensions_Width : 3.94 inches ItemPackageQuantity : 1 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : uxcell Material : Brass Material1 : Metal Material2 : Plastic ModelName : PI491212S ModelNumber : KQT11-36S NumberOfItems : 2 NumberOfPieces : 5 PartNumber : a24101900ux0782 ProductDescription : Description: 360 Degrees Rotation Access: These straight-thread push-to-connect fittings offer a 360-degree rotation capability, ensuring a secure connection without air leakage and optimal performance during operation. Brass Material: The push-to connector is constructed from brass for durability and wear-resistant with nickel plated for protection against rust and tarnish. The stainless steel spring increases clamp force efficiency and strength. Compact Connection: With meticulous craftsmanship, clear thread structure, and a smooth surface free of burrs, these fittings provide a tight and leak-resistant connection. Application: These brass push-to-connect fittings are commonly used in pneumatic systems for connecting air lines, valves, cylinders, and other components. It can be used for fluid transfer, pneumatic systems, the automotive industry, and HVAC systems. How to Use: Simply push the tubing into the fitting until it reaches the bottom, allowing the stainless steel teeth to grip and secure the tube in place. Press the release sleeve on the fitting to release the tubing and gently pull the tube out. Specification:
Inner Diameter: 10mm(3/8") Outer Diameter: 16 mm/0.6 inch Hex Width: 22 mm/0.9 inch Thread Size: 3/8" NPT Sealing Ring Material: NBR Fluid Admitted: Air, Vaccum, Water (no freezing), Steam Body Material: Nickel Plated Brass, POM and PBT Lock Claw: Zinc Alloy Nickel Plated Applicable Tube: PU/PA/PE/Tubing Lock Spring: Stainless Steel Thread Material: Nickel Plated Brass Package Content: 2 x Push to Connect Fittings