Specification Brand : uxcell BulletPoint1 : Three Tube Size (OD) : 4mm BulletPoint2 : Push-to-connect tube connection on Three end. A good release cap can withstand greater and stronger pressure without tripping. BulletPoint3 : The Push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. BulletPoint4 : Applications: Mainly used for air compression systems, vacuum systems, pneumatic systems. BulletPoint5 : Note: Make sure that the cutting surface of the pipe is vertical. Please insert the tube into the bottom before use. Color : Gray ConnectorType : Cap ExteriorFinish : Brass ExteriorFinish1 : Nickel ExteriorFinish2 : Brass ExternallyAssignedProductIdentifier : 3593539425835 ExternallyAssignedProductIdentifier1 : 0305279710958 ExternallyAssignedProductIdentifier2 : 305279710958 GpsrSafetyAttestation : 1 IncludedComponents : inc ItemName : uxcell Push to Connect Air Fittings T Type Tee Tube Connect 4mm OD Grey Push Lock 10Pcs ItemPackageDimensions_Height : 11.7 centimeters ItemPackageDimensions_Length : 2.8 centimeters ItemPackageDimensions_Width : 9.3 centimeters ItemPackageQuantity : 10 ItemShape : union ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : uxcell Material : Plastic ModelName : ZUSA-PTC-PBT-334 ModelNumber : a19112900ux0169 NumberOfItems : 10 NumberOfPieces : 10 PackageLevel : unit PartNumber : a19111100ux0214 ProductDescription : Features: Color : Grey Material : Plastic, Nickel-plated Brass Type: T Type Tee Connector Three Tube Size (OD) : 4mm / 5/32" Operating Pressure : 0-1MPa Operating temperature:-10 - 60 Degree Celsius Dimension : 37mm x 25mm x 11mm / 1.46-inch x 0.98-inch x 0.43-inch(L x W x H )
Package Contents: 10pcs x Fitting
Descriptions: 1.Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing. 2.A good release cap can withstand greater and stronger pressure without tripping. 3.Have flexibility, abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life. 4.Easy to install, insert the plastic tube, the cap can be rotated freely, but its rotation is only used when the angle is wrong when the joint is installed.
Mounted: 1.Cut the pipe flat, no slope 2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak. 3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected. 4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.