Cart 2 india

Specification
Brand : HePbak
BulletPoint1 : Made of high quality material, durable and practical to use.
BulletPoint2 : For GEP-CL35 Performance Frame developed by For CEPRC for mounting For GoPro camera is now officially released.
BulletPoint3 : For CineLog35 Performance frame is improved and optimized on the basis of the For CineLog35 frame. It supports the installation of mainstream For AIO flight controllers with 25.5mm x 25.5mm holes. The mounting holes for 20mm x 20mm/25.5mmx25.5mm can be directly installed For VISTA and For AVATAR digital For VTX.
BulletPoint4 : The propeller guard adopts an integrated design, and the overall structure is more solid. For GEP-CL35 Performance frame uses brand new materials that are stronger impact resistance and better toughness.
BulletPoint5 : Upgrade the power system, use a 12mm x 12mm motor holes, compared with the For CL30, a larger 15-18-21 series motors can be installed. With 3.5 inch propellers, has a stronger power output. Greater mounting compatibility, you can use 3D printed parts to install For GoPro 8/9/10 cameras, or use the base to install naked For GoPro8, For Insta 360 GO2 and For Caddx Peanut cameras.
Color : Camera power wire
ExternallyAssignedProductIdentifier : 8135275915239
ItemName : for GEPRC GEP-CL35 for CineLog35 Performance Frame Kit Parts CL35P Lighter Weight for mounting for GoPro/for Insta360 GO2 Camera Drone Parts (Color : Camera Power Wire)
ItemPackageQuantity : 1
ItemTypeKeyword : video-camera-quadcopter-mounts
Manufacturer : HePbak
NumberOfItems : 1
PartNumber : HePbak156
ProductDescription : Note:
Please check the pictures, models and part number carefully for compatibility before ordering.
For GEPRC GEP-CL35 For CineLog35 Performance Frame Kit Parts CL35P lighter weight for mounting For GoPro /For Insta360 GO2 camera

Specification
Model: For GEP-CL35 Performance
Motor to Motor: 142mm
Top plate: 2.5mm
Bottom plate: 2.0mm
Arm plate: 3.5mm
FC mounting hole: 25.5mm x 25.5mm
For VTX mounting hole: 20mm x 20mm/25.5mm x 25.5mm
Motor mounting hole: 12mm x 12mm
Camera installation space: 14~19mm
Propeller guard internal diameter: 95mm
Suitable propeller size: 3.5 inch propeller
Dimension: 203mm x 203mm x 42mm(Including propeller guard)
Weight:105.7g(Including propeller guard, 3D print parts, For Naked For GoPro 8 mount )
Feature
1.3.5-inch injection-molded one-piece propeller guard, brand new appearance design, hollowed-out noise reduction design, quiet and safe flight.
2. Can install mainstream 14/19mm camera.
3. Improved shock absorption gimbal design, more stable and clearer shooting effect, reduce the jelly effect.
4. For GoPro8/9/10 can be installed with 3D printed parts, you can also use the For Naked For GoPro 8 mount to install For Naked For GoPro 8, For Insta 360 GO2 and For Caddx Peanut camera.
5.12 x 12mm motor holes, support mounting 1507/1805/2004/2105.5 and other motors.
6. Support the installation of 3.5-inch propellers, with strong power output
7. Independent receiver cabin design, convenient and fast frequency binding.
Set Includes
1 x Top Plate 2.5mm
1 x Arm Plate 3.5mm
1 x Bottom Plate 2.0mm
1 x Set of screws
1 x Set of screwdrivers
1 x Set of cables
1 x Set of 3D print parts
2 x 3.5 inch integrated propeller guards
2 x Battery Non-slip Mat
2 x M15x200mm battery straps
1 x Antenna Mounting Tube
Other parts

Note: You buy set, we will sent SET, if you just buy alone part, we will just
ProductSiteLaunchDate : 2023-10-16T07:40:14.471Z
UnitCount : 1