Cart 2 india

Specification
Brand : PGFUN
BulletPoint1 : 1:1 T-shaped Right Angle Bevel Gearbox for DIY and Simple CNC Mechanical Application, 1 Input Shaft Drives 2 Forward and Reverse Output Shafts.
BulletPoint2 : Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6" shaft, Max Axis Loading: 30 kgs/ 66.1 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1200 rpm, backlash: 5 degree, if 3D file (stp) is needed, free to contact us.
BulletPoint3 : Motor drive can be realized with coupling and belt pulley gear.
BulletPoint4 : Material: Aluminum alloy & #45 Steel, the input and output shafts take the blackening or galvanizing process (random), Overall Size: 107.3 x 60 x 46 mm/ 4.2 x 2.4 x 1.8 inch.
BulletPoint5 : Note: it's simple steering gearbox, can not used for high accuracy CNC application.
ExternallyAssignedProductIdentifier1 : 0777723135677
ExternallyAssignedProductIdentifier2 : 777723135677
ExternallyAssignedProductIdentifier3 : 00781711135860
ItemName : PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
ItemPackageDimensions_Height : 11.7094 centimeters
ItemPackageDimensions_Length : 5.6896 centimeters
ItemPackageDimensions_Width : 10.6934 centimeters
ItemPackageQuantity : 1
ItemShape : Straight
ItemTypeKeyword : rack-and-pinion-gears
Manufacturer : PGFUN
Material : Bronze
ModelNumber : TYXC-0048-2_15
NumberOfItems : 1
NumberOfTeeth : 20
PartNumber : TYXC-0048-2_15
ProductDescription : 1:1 T-shaped Right Angle Bevel Gearbox for DIY and Simple CNC Mechanical Application, 1 Input Shaft Drives 2 Forward and Reverse Output Shafts.
Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6" shaft, Max Axis Loading: 30 kgs/ 66.1 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1200 rpm
Motor drive can be realized with coupling and belt pulley gear.
Material: Aluminum alloy & #45 Steel, Overall Size: 107.3 x 60 x 46 mm/ 4.2 x 2.4 x 1.8 inch.
Note: it's simple steering gearbox, can not used for high accuracy CNC application, and the input & output shaft is not available to replace.

Note: the scratches on the shaft were left for installation, it's not used, pls do not buy if you mind.
ProductSiteLaunchDate : 2022-11-19T15:29:10.652Z
StreetDate : 2017-05-15T00:00:01Z
Style : 2 Short Output Shaft
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1