Cart 2 india

Specification
AudioOutputMode : Surround
Brand : QIACHIP
BulletPoint1 : Multiple working modes : Momentary Mode, Toggle Mode, Latched mode
BulletPoint2 : Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, remote control socket, remote control LED, garage door remote control, remote control door opener, remote control curtains, alarm host, remote control MP3.
BulletPoint3 : Superheterodyne
BulletPoint4 : Small size
BulletPoint5 : Wide voltage input (transmitter) ：DC 3V-24V
Color : Blue
CompatibleDevices : [Inferred from application environments]
ConnectivityTechnology : USB
ConnectorType : RCA
ControllerType : Android
ControlMethod : remote
ExternallyAssignedProductIdentifier1 : 703633898579
ExternallyAssignedProductIdentifier2 : 0703633898579
ItemName : QIACHIP 3 Sets of 433mhz RF Transmitter and Receiver Module Wireless 4 Channel Output Link Kit Set with 1527 Learning Code for Remote Control
ItemPackageDimensions_Height : 8.7884 centimeters
ItemPackageDimensions_Length : 2.4892 centimeters
ItemPackageDimensions_Width : 7.0866 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : garage-door-remote-controls
Manufacturer : QIACHIP
Material : fiber
MaximumSupplyVoltage : 50 volts
MinimumSupplyVoltage : 1 volts_of_direct_current
ModelNumber : 369ecf7b-ccff-482b-a51d-d18fdf459a82
MountingType : Surface Mount
NumberOfChannels : 1
OutputPower : 12 milliwatts
PartNumber : Ciglow5zeqsxmugd
ProductDescription : [Transmitter module ] Product Model: TX118SA-4
Transmitting power: 11dbm
Emission current: 10 mA
Rate of fire: maximum 10KB / S
Operating Voltage: DC 3V-24V
Encoding : EV1527 1527 Learning code
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
[Receiver module ] Product Model: RX480-E4
Voltage : DC3.3~5V
Quiescent Current : ≤5mA
Output current : 10 mA
Working Frequency: 433MHz
Receive Sensitivity: -108dB
Temperature : -25~75
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. Pins Instruction
GND : ground or negative pole
+V : DC3.3~5V input
D0: Data output
D1: Data output
D2: Data output
D3: Data output
VT: Output
[How to match the transmitter and receiver]
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). LED turns on: learning mode is active. Press any button of the remote control. LED indicator flashes three times: learning successfully completed. 3. Test: after the above operation , the receiver board can be controlled by the remote control. More transmitters with different IDs can be learned and stored additionally, starting with step 2. A mixture of different modes is possible.
Button usage (sets mode and starts pairing process): Press once: Inching mode (Momentary Mode) Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
ProductSiteLaunchDate : 2021-01-12T06:13:22.043Z
Size : Small
Style : RX480E+TX118SA 3SETS
SupplierDeclaredDgHzRegulation : not_applicable
SurroundSoundChannelConfiguration : 4 Channel
UnspscCode : 25174400
Voltage : 50 volts
WirelessCommunicationTechnology1 : IR
WirelessCommunicationTechnology2 : RF