Cart 2 india

Specification
AssemblyTime : 10
Brand : RC-ART
BulletPoint : It can be used to securely hold round capacitors such as RS-CAPA in a stylish manner
BulletPoint1 : Frequency Range: 2400 MHz to 2500 MHz
BulletPoint2 : Maximum receive refresh rate: 500Hz
BulletPoint3 : Minimum receiver refresh rate: 25Hz
BulletPoint4 : Working voltage: 5v
BulletPoint5 : Weight: 0.44gram
Color : Black
ExternallyAssignedProductIdentifier : 4582387285332
IncludedComponents : Capacitor Base, Nylon Band, Set Screws
IsAssemblyRequired : 1
ItemName : Capacitor Base, Pack of 2 (Black)
ItemPackageDimensions_Height : 20 millimeters
ItemPackageDimensions_Length : 120 millimeters
ItemPackageDimensions_Width : 80 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-receivers
Manufacturer : WORLD PRO
ManufacturerMinimumAge : 10
Material : Aluminum
ModelName : XvuaTeIw
ModelNumber : WP-0254
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : WP-0254
ProductDescription : Bind procedure: 1. Supply power to the EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
3. Receiver LED status meanings: EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(password:expresslrs)
Specifications: EP2_RX
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.44gram
Dimension: 10mm x 10mm x 6mm
Peak gain: 3.7dB
Material: PCB
colour: black
Package Contents:
1 x Receiver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
ProductSiteLaunchDate : 2025-03-10T17:55:01.171Z
SafetyWarning : Please be careful to lose parts when you assemble the item
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Unisex Adult
UnitCount : 0.0353
UnspscCode : 32121500