Specification BatteriesIncluded : 1 BatteriesRequired : 1 Brand : ZYHOBBY BulletPoint1 : Replace original part number: 37AAAM6YMX, 40AAAM6YMX, BP-15, BP15RT, DC-7, EDT102 BulletPoint2 : Item Type: Ni-MH, Voltage: 7.2V, Capacity: 300mAh/2.16Wh, Size: 28.79 x 31.06 x 21.00mm, Weight: 113.2g. BulletPoint3 : 100% Compatible with original battery. BulletPoint4 : 30 days money back, 24 hours timely feedback. BulletPoint5 : Please feel free to contact us with any questions. Edition : EP1 Hazmat1 : LITHIUM ION BATTERIES Hazmat10 : CA_SmallLithiumIonBatteryStandalone Hazmat11 : CN_SmallLithiumIonBatteryStandalone Hazmat12 : IT_SmallLithiumIonBatteryStandalone Hazmat13 : ES_SmallLithiumIonBatteryStandalone Hazmat14 : IN_SmallLithiumIonBatteryStandalone Hazmat15 : MX_SmallLithiumIonBatteryStandalone Hazmat16 : SG_SmallLithiumIonBatteryStandalone Hazmat17 : AU_SmallLithiumIonBatteryStandalone Hazmat18 : BR_SmallLithiumIonBatteryStandalone Hazmat19 : TR_SmallLithiumIonBatteryStandalone Hazmat2 : UN3480 Hazmat20 : AE_SmallLithiumIonBatteryStandalone Hazmat21 : SA_SmallLithiumIonBatteryStandalone Hazmat22 : EG_SmallLithiumIonBatteryStandalone Hazmat23 : NL_SmallLithiumIonBatteryStandalone Hazmat24 : SE_SmallLithiumIonBatteryStandalone Hazmat25 : PL_SmallLithiumIonBatteryStandalone Hazmat26 : BE_SmallLithiumIonBatteryStandalone Hazmat27 : ZA_SmallLithiumIonBatteryStandalone Hazmat28 : IE_SmallLithiumIonBatteryStandalone Hazmat3 : II Hazmat4 : 9 Hazmat5 : US_SmallLithiumIonBatteryStandalone Hazmat6 : GB_SmallLithiumIonBatteryStandalone Hazmat7 : DE_SmallLithiumIonBatteryStandalone Hazmat8 : FR_SmallLithiumIonBatteryStandalone Hazmat9 : JP_SmallLithiumIonBatteryStandalone IncludedComponents : Battery ItemName : ELRS 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver 2.4G ExpressLRS PP EP1 EP2 (EP1) ItemPackageQuantity : 1 ItemTypeKeyword : hobby-rc-vehicle-receivers Manufacturer : ZYHOBBY ManufacturerMinimumAge : 12 Material : copper ModelNumber : CS-SDC07SL NumberOfItems : 1 NumberOfLithiumIonCells : 1 PartNumber : FPVTD403 ProductDescription : EP1_RX Type: ISM ESP8285 MCU SX1280IMLTRT RF Module Omnidirectional antenna Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 0.42gram(without antenna) Dimension: 10mm*10mm*6mm Peak gain: 2.23dB Bind procedure: 1. Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode 2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully. 3. Receiver LED status meanings: PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(password:expresslrs) ProductSiteLaunchDate : 2022-03-11T10:02:54.288Z Reusability : Rechargeable Size : 28.79 x 31.06 x 21.00mm SupplierDeclaredDgHzRegulation : not_applicable TargetAudienceKeyword : unisex-children UnitCount : 1 UnspscCode : 43221700 Voltage : 7.2 volts