Cart 2 india

Specification
Brand : RADIOMASTER
BulletPoint1 : The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.
BulletPoint2 : The RP2 V2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP2 V2 has a built-in ceramic antenna which is super light and small in size and ideal for racing.
BulletPoint3 : The RP2 V2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone.
BulletPoint4 : Due to the low-latency and high-refresh-rate RF module, the RP2 V2 is ideal for FPV races or Long Range. Suitable for many models due to the ultra-light and Nano size, these receivers can fit just about anywhere!
BulletPoint5 : Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Color : F04A
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 7664200371945
ExternallyAssignedProductIdentifier1 : 0749614674336
ExternallyAssignedProductIdentifier2 : 749614674336
IncludedComponents1 : 1 * RP2 V2 ExpressLRS 2.4ghz Nano Receiver
IncludedComponents2 : 1 * User Manual
IncludedComponents3 : 1 * CRSF wire
ItemName : RadioMaster RP2 V2 2.4ghz ExpressLRS ELRS Nano Receiver
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-receivers
Manufacturer : Greathobby RC
ManufacturerMinimumAge : 216
Material : Plastic
ModelName : Radiomaster RP2 V2
NumberOfItems : 1
PartNumber : BR00RP2
ProductDescription : Features
Improved PCB design is better for heat dissipation.
LED on the top side of PCB.
Solder pads are improved and easier to solder to.
Built-in a TCXO (temperature compensated crystal oscillator)
Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
Specification
Item: RP2 Nano ExpressLRS 2.4ghz Receiver
Type: ISM
MCU: EPS8285
RF Chip: SEMTECH SX1281
Telemetry RF power: 10mW
Antenna: On Board SMT Antenna
Antenna: 65mm 2.4ghz T Antenna
Frequency Range: 2.404 - 2.479 Ghz
Maximum receive refresh rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.55g (On Board antenna)
Dimension: 13mm*11mm*7mm
Firmware Version: ExpressLRS v2.4 pre-installed
FW Target: RadioMaster RP1/2 2400 RX
Bus interface: CRSF
Package Includes
1 * RP2 ExpressLRS 2.4ghz Nano Receiver
1 * User Manual
1 * CRSF wire

ProductSiteLaunchDate : 2025-02-26T01:58:33.101Z
SafetyWarning : Please refer to the instruction manual before use
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Unisex Adult
UnspscCode : 60140000