Cart 2 india

Specification
Brand : ASC Audio
BulletPoint1 : 4 Channel Add an Amp Adapter. Use this adapter to make your installation of a 4 channel amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides 2 pair stereo RCA output. Adjustable 4 channel gain output. Retains fader and balance.
BulletPoint2 : Use to add a 2/4/5/6 channel amp to power the vehicle speakers. Connection is done at back of radio. Quick disconnect bare wire connector to connect factory speakers to the new amp- won't require looking for or cutting of factory speaker wires. The speaker wire is already cut on this adapter so you can connect speaker wires to it to run to the new amp- once this adapter is connected the factory speakers will need to be connected to an aftermarket amplifier for the system to work.
BulletPoint3 : Quick disconnect is to connect speaker wires to run to the new amp- only the speaker wires are connected to the factory speakers- all other wires aren't used. This adapter doesn't have the amp turn on wire- that has to be found and connected separately. Connecting this adapter to the factory wiring will disconnect the vehicle speakers from the radio- required adding amp for speakers to work.
BulletPoint4 : VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.).
BulletPoint5 : Compatible vehicles: No external factory amp: Made for Chrysler: 2015-2017 200, 2017-2020 Pacific;; Made for Dodge: 2013-2016 Dart, 2014-2020 Durango;; Made for Fiat: 2016-2019 500 (no L, no X models), 2014-2020 500L , 2016-2022 500X;; Made for Jeep: 2014-2018 Cherokee, 2018-2020 Compass, 2015-2020 Renegade, 2019-2022 Wrangler ;; Ram: 2013-2022 Ram Truck, 2014-2021 Promaster (not compatible with 2014-2016 radio delete or am/fm only models), 2015-2020 Promaster City
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 606523109185
ExternallyAssignedProductIdentifier2 : 0606523109185
ExternallyAssignedProductIdentifier3 : 00606523109185
ExternallyAssignedProductIdentifier4 : 0163121229450
ExternallyAssignedProductIdentifier5 : 00086429031009
FitType : Vehicle Specific
IncludedComponents : 1 Metra Branded Product
ItemName : 4 Channel Full System Add an Amp Amplifier Adapter Interface to Factory OEM Car Stereo Radio System for Select Chrysler Dodge Ram Vehicles - No Factory Premium Amp/Bose- Vehicles Listed Below
ItemPackageDimensions_Height : 4.826 centimeters
ItemPackageDimensions_Length : 21.59 centimeters
ItemPackageDimensions_Width : 21.844 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-wiring-harnesses
Manufacturer : Other
MaximumSupplyVoltage : 12 volts
ModelNumber : AA6523-4ch
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfChannels : 4
NumberOfItems : 1
PackageTypeName : [other]
PartNumber : RP4-AD11
ProductDescription : 4 Channel Add an Amp Adapter. Use this adapter to make your installation of a 4 channel amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides 2 pair stereo RCA output. Adjustable 4 channel gain output. Retains fader and balance. Use to add a 2/4/5/6 channel amp to power the vehicle speakers. Connection is done at back of radio. Quick disconnect bare wire connector to connect factory speakers to the new amp- won't require looking for or cutting of factory speaker wires. The speaker wire is already cut on this adapter so you can connect speaker wires to it to run to the new amp- once this adapter is connected the factory speakers will need to be connected to an aftermarket amplifier for the system to work. Easy to put back to stock. Just remove this adapter and it goes back to stock system. Compatibility Notes: Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (No Bose, Monsoon, etc.) Quick disconnect is to connect speaker wires to run to the new amp- only the speaker wires are connected to the factory speakers- all other wires aren't used. This adapter doesn't have the amp turn on wire- that has to be found and connected separately. Connecting this adapter to the factory wiring will disconnect the vehicle speakers from the radio- required adding amp for speakers to work. Compatible vehicles: No external factory amp: Made for Chrysler: 2015-2017 200, 2017-2020 Pacific;; Made for Dodge: 2013-2016 Dart, 2014-2020 Durango;; Made for Fiat: 2016-2019 500 (no L, no X models), 2014-2020 500L , 2016-2022 500X;; Made for Jeep: 2014-2018 Cherokee, 2018-2020 Compass, 2015-2020 Renegade, 2019-2022 Wrangler ;; Ram: 2013-2022 Ram Truck, 2014-2021 Promaster (not compatible with 2014-2016 radio delete or am/fm only models), 2015-2020 Promaster City
ProductSiteLaunchDate : 2019-11-28T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 32101500
Voltage : 12 volts
WarrantyDescription : Manufacturer Warranty