Cart 2 india

Specification
Brand : Mallofusa
BulletPoint1 : This wire harness provides a connection for one set of RCA cables as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.
BulletPoint2 : This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that’s left for you to do is connect the main power wire from your battery (Not included) and ground.
BulletPoint3 : Converter adjustment instructions: 1, After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise. 2, Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume. 3, Select one of the adjustment pots and turn it slowly clockwise until you notice the sound and then stop. 4, Turn the remaining pot to the same position as the previously adjusted pot.
BulletPoint4 : Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature. Easy to install. Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob. It is up to the installer to select which circuit to use with the Add-A-Circuit.
BulletPoint5 : Package Included: 1 x wire harness, 1 x Add-A-Circuit fuse tap, 1x 3 amp fuse (show as the picture), Installation Instruction Not Included. Compatible for Ford 2011-2018 Factory Radio
BulletPoint6 : Part Number: Door speaker adapter wire harness replacement for metra 72-6514. Quality speaker wire harness adapter connector made it replace the original/ old one directly and provided you more reliability
BulletPoint7 : Easy to Install: For the 72-6514 - Door Speaker Replacement installation is simple to play and plug, no more tools and time needed and the instalation is completed, save you more
BulletPoint8 : You Will Get: 4 pack 72 6514 speaker plug wiring harness. If any issues about these speaker harness or if you need any helps about them, we are willing to help you
Color : gray
CompatibleDevices : Home Theater
ConnectivityTechnology : Bluetooth
ConnectorType : RCA
ExternallyAssignedProductIdentifier1 : 700604540192
ExternallyAssignedProductIdentifier2 : 0700604540192
GpsrSafetyAttestation : 1
IncludedComponents : Microphone
ItemName : Mallofusa Add A Subwoofer Amplifier W/Amp Plug & Play Wire Harness Compatible for Ford F-150 Escape Edge Mustang Fusion 2011-2020 Factory Radio
ItemPackageDimensions_Height : 19.812 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 14.5034 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-wiring-harnesses
Manufacturer : Mallofusa
Material : Plastic
MicrophoneFormFactor : Boundary
ModelNumber : auai00601
NumberOfChannels : 1
NumberOfItems : 1
PartNumber : auai00601
PolarPattern : Unidirectional
PowerSourceType : Corded Electric
ProductDescription : Details:
1, This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier, as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.
2, This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that’s left for you to do is connect the main power wire from your battery (Not included) and ground.
3, Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob.
4, It is up to the installer to select which circuit to use with the Add-A-Circuit. The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate.
5, A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
6, Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature.

Easy to Install:
1, Remove your original factory radio
2, Unplug the original factory wiring and plug in this wire harness
3, Reinstall your original factory radio

Fitment:
Compatible with these models (partial models, not all):
For Ford Edge 2015-2018
For Ford Escape (with 4.2" screen) 2013-2020
For Ford Explorer (with 4.2-inch screen) 2011-2020
For Ford F-150 2015-2020
For Ford F-250/350/450/550 2017-2020
For Ford Fiesta 2014-2020
For Ford Focus (with 4.2-inch screen) 2015-2020
For Ford Fusion 2013-2020
For Ford Mustang 2015-2020
For Ford Transit 2015-2020

Package Included:
1 x Wire Harness
1 x Add-A-Circuit Fuse Tap
1 x 3 Amp Fuse
Show As The Picture
Installation Instruction Not Included.
ProductSiteLaunchDate : 2020-11-03T08:00:00.000Z
RecommendedUsesForProduct : Karaoke
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26121700