Cart 2 india

Specification
Brand : Mallofusa
BulletPoint : Fits Pioneer DEH-X4700BT Aftermarket Stereo Radio Receiver Replacement Wire Harness
BulletPoint1 : This wire harness provides a line out converter for connection to one set of RCA cables to provide an audio signal to an external amplifier. Also pre-installed on the harness is a remote amplifier turn on wire
BulletPoint2 : This wire, along with a set of RCA cables, is run to your amplifier. All that’s left for you to do is connect your own main power wire from your battery and a ground
BulletPoint3 : Converter adjustment instructions: 1,After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise. 2, Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume. 3, Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop. 4, Turn the remaining pot to the same position as the previously adjusted pot.
BulletPoint4 : Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature. Easy to install. Audio volume to the amplifier can be adjusted by the dials on the harness.
BulletPoint5 : Package Included: 1 set x wire harness (show as the picture), Installation Instruction Not Included. Compatible for Toyota Subaru Scion Lexus
Color : gray
ConnectorType : Rca, Spade/Bare Wire
GpsrSafetyAttestation : 1
ItemName : Mallofusa Add an Amplifier Adapter W/Amp Turn On Wire Harness Compatible for Toyota Subaru Scion Lexus Select
ItemPackageDimensions_Height : 11.9126 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 8.7884 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-wiring-harnesses
Manufacturer : Mallofusa
Material : Copper, Polyvinyl Chloride (PVC)
Material1 : Polyvinyl Chloride (PVC)
Material2 : Copper
ModelNumber : auai00301
PartNumber : auai00301
ProductDescription : Details:
1, This wire harness provides a line out converter for connection to one set of RCA cables to provide an audio signal to an external amplifier.
2, Also pre-installed on the harness is a remote amplifier turn on wire.
3, This wire, along with a set of RCA cables, is run to your amplifier. All that’s left for you to do is connect your own main power wire from your battery and a ground.
4, Audio volume to the amplifier can be adjusted by the dials on the harness.
5, If this is being installed on a vehicle with a "premium sound" system, this harness may need to be connected at the system amp and not directly at the radio.
6, A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
7, Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature.

Easy to Install:
1, Remove your original factory radio
2, Unplug the original factory wiring and plug in this wire harness
3, Reinstall your original factory radio

Fitment:
Compatible with these models (partial models, not all):
For GEO Prizm 1989-1992
For LEXUS ES250 (with cassette) 1990-1991
For LEXUS LS 400 1990-1992
For SCION FRS 2013-2016
For SCION tC 2005-2015
For SUBARU BRZ 2013-2015
For SUBARU Forester (with nav) 2014-2015
For SUBARU Legacy (w/ nav) 2013-2014
For SUBARU Outback (w/ nav), XV Crosstrek (with nav) 2013-2014
For TOYOTA 4-Runner 2014-2016
For TOYOTA Avalon (with nav) 2013-2016
For TOYOTA Camry Celica Corolla Echo FJ Cruiser Highlander Matrix Sienna Tacoma Venza

Package Included:
One Set x Wire Harness (show as the picture)
Installation Instruction Not Included.
ProductSiteLaunchDate : 2020-11-03T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26121600