Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : D-Rings Tiedown Attachments - 12 Pack
BulletPoint1 : 4,000 lb. rating (straight pull). WLL is 1,333 lb. capacity* 1/4" drain hole.
BulletPoint2 : This attachment measures 3-3/4" wide x 5" long. The 1/4" diameter ring measures 1-1/2" wide x 2" long.
BulletPoint3 : The "top cap" is 11 gauge or 1/8" thick. The tiedown attachment is secured with one 3/8" diameter mounting hole and a 1/4" rivet.
BulletPoint4 : The galvanized backing plate measures 6" x 6" Thickness is 10 gauge ( 1/8").
BulletPoint5 : Multiple hole configurations for use with 8 varieties of attachments. Each plate weighs 1.05 lbs.
Color : Blue,Red
CompatibleWithVehicleType1 : Watercraft
CompatibleWithVehicleType2 : Trailer
ExternallyAssignedProductIdentifier1 : 4018754134632
ExternallyAssignedProductIdentifier2 : 04018754134632
ExternallyAssignedProductIdentifier3 : 00081628864878
FinishType : Powder Coated
GpsrSafetyAttestation : 1
Hazmat : auto-grounding
IncludedComponents : SPARE PARTS SET FOR RATCHET
ItemDisplayWeight : 1.25 pounds
ItemName : Surface Mount TieDowns D-Ring 4000 Tiedown w/Backing Plate 12 Pack
ItemPackageDimensions_Height : 5.588 centimeters
ItemPackageDimensions_Length : 27.94 centimeters
ItemPackageDimensions_Width : 20.32 centimeters
ItemPackageQuantity : 24
ItemTypeKeyword : ratchet-tie-downs
Manufacturer : D-Rings Tiedown Attachments - 12 Pack
Material : Polypropylene
ModelName : 4110
ModelNumber : 40215-10-12B
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 40215-10-12B
PartTypeId : 86487
ProductDescription : This listing is for TWELVE (12) tie down attachments and backing plates. Purchased individually @ $9.10 each, the cost would be $109.20 - therefore you SAVE $27.50. The strong surface mount d-ring has a 4,000 lb. vertical pull weight rating*. The ring and backing plate are zinc coated to inhibit corrosion. These surface mount D-rings are also available without Backing Plates. The backing plate is used for support under the floor when installing the attachments, and prevents the bolts from pulling through. *RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
ProductSiteLaunchDate : 2012-03-23T23:28:52.658Z
Size : 3 Inches
Style : Durability
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : 1 year limited