Cart 2 india

Specification
AgeRangeDescription : Adult
BottleType : narrow mouth
Brand : LCGJZTPN
BulletPoint1 : Excellent chemical resistance, components are made of PTFE, FEP, BSG, PP.Four ranges of bottle-top dispenser covering a volume range from 0.5mL to 50mL.
BulletPoint2 : Easy for cleaning and maintenance.The optional flexible discharge tube with safety handle permits fast and precise dispensing.
BulletPoint3 : Vapor pressure max. 500mbar, viscosity max. 500mm2/s.Temperature max. 40oC, density max. 2.2g/cm3.
BulletPoint4 : is supplied with S40, GL32, GL38,GL25, GL28.
Capacity : 250 milliliters
Color : One Color
ExternallyAssignedProductIdentifier : 4159875914793
ItemName : Bottle Top Dispensers Stepper Bottle for Laboratory Liquid Handling Use with Brown Reagent Bottle 0.5 mL - 50 mL(0.5-5ml with Bottle)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-reagent-bottles
Manufacturer : LCGJZTPN
Material : High Density Polyethylene
ModelName : LCGJZTPN
ModelNumber : LCGJZTPN
NumberOfItems : 1
PartNumber : LCGJZTPN
ProductDescription : Features
Excellent chemical resistance, components are made of PTFE, FEP, BSG, PP.
Four ranges of bottle-top dispenser covering a volume range from 0.5mL to 50mL.
Easy for cleaning and maintenance.
The optional flexible discharge tube with safety handle permits fast and precise dispensing.
Vapor pressure max. 500mbar, viscosity max. 500mm2/s.
Temperature max. 40oC, density max. 2.2g/cm3.
is supplied with S40, GL32, GL38,GL25, GL28.
Specification
How to use ?
1. Install the pipette
According to the size of the reagent bottles used to cut the appropriate length of the suction pipette.Manually with a fixed suction tube with a threaded end of the mouth to tighten the bottom of the bottle distributor on the valve.
2. Install the return line
Insert a straight end of a short, one-sided, clear, return line into the socket on the bottom of the bottle dispenser next to the aspiration tubing valve.
3. Install the manifold
Secure the dispensing tube with the white plastic support sheath to the horizontal connector on the front of the bottle dispenser through the retaining nut on one end of the dispenser Note that the cartridge is tightened before tightening the nut.
4. Install to the reagent bottle
If the diameter of the reagent bottle is smaller than the diameter of the reagent bottle, it can be connected with the three screw adapters (diameter: A32. A38 and the diameter of the screw thread) S40) to be transferred to the used reagent bottle.
5. Prepare the pipette
Hold the reagent bottle in one hand and turn the bottle dispenser in one hand so that the label of the dispensing tube and the reagent bottle is facing the operator Put the liquid container under the dispensing tube mouth Remove the sealing cap of the dispensing tube (I.e., in the direction of the dispensing tube interface) so that the cap is inserted into the fixed position.
6. In addition to air bubbles
Rotate the dial on the top of
ProductSiteLaunchDate : 2024-12-05T05:36:28.173Z
Size : 0.5-5ml With bottle
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24122000