Cart 2 india

Specification
Brand : Cntuohai
BulletPoint1 : 8 color segments, 3 screw holes, Diameter: 40mm. Please check the size and color of the color wheel before purchasing to ensure that it does not delay the customer's time. If you are in doubt, simply compare your old wheel against the photo.
BulletPoint2 : Compatible with Optoma Projector: UHD50x/UHD30/UHD35+/UHD38/UHD42/UHD566/UHD588 色轮
BulletPoint3 : Note Installation instructions: You must adjust the CW delay on the hidden menu settings because on default the colors are completely off Just a note, you will have to go into the service menu and adjust the color wheel speed to correct the color timing and get a picture that is correct in color, pretty easy to do once you find the setting.
BulletPoint4 : Time to replace the color wheel for your projector when the colors of images don't look correct though with a new lamp,A perfect replacement to your defective color wheel
BulletPoint5 : Warranty as long as 6 months (From Date of Purchase); Professional and nice customer service: messages will be replied by well-trained support team within 24 hours
Color : Black
ControlMethod : application
ExternallyAssignedProductIdentifier : 5294050494215
ExternallyAssignedProductIdentifier1 : 0790913740604
ExternallyAssignedProductIdentifier2 : 790913740604
FinishType : Unfinished
FixtureType : Removable
IncludedComponents : Original Inside RPTV Lamp & Housing
IndoorOutdoorUsage : indoor
ItemName : Cntuohai Projector Color Wheel Compatible with Optoma UHD50x/UHD30/UHD35+/UHD38/UHD42/UHD566/UHD588
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : rear-projection-tv-replacement-lamps
LightColor : White
LightType : Metal Halide
Manufacturer : CNTUOHAI
Material1 : Plastic
Material2 : Glass
Material3 : Metal
ModelName : 100% NEW Projector Color Wheel
ModelNumber : WD-82842-LAMP
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLightSources : 1
OutputWattage : 20 watts
PartNumber : WD-82842-LAMP
Pattern : Solid
PowerSourceType : Corded Electric
ProductDescription :

CNTUOHAI Lamps: Ultra High Efficiency Replacement Projector Lamps,New Generation A+ Lampwick.

CNTUOHAI has been specialized in projector lamps for more than 10 years, all the lamps are designed accurately matching your original lamps. The CNTUOHAI lamps use optimized very short arc and high internal pressure lamp wick, with precision coated reflectors,

Easy To Replace the Lamp

CNTUOHAI lamps are designed accurately matching your original lamps, our lamp instructions will help you replacing it easily.

Warning:

1). Before you replace the lamp, let the projector cool down for at least one hour to let the lamp fully cool before replacing it to avoid injury.

2). Do not touch any glass on the lamp assembly to avoid premature lamp failure.

How To Extended Lamp Life

1). Turn off this product when not in use to prolong the lamp life.

2). Don’t operate the projector non-stop or for too much long time.

3). Do not unplug the power line before the cooling fan stop working, and also do not disconnect the power directly on the working projector.

4). After turning off the projector, wait at least 60 minutes to reboot the projector.

5). ECO mode will help you extend the lamp life.

6). Clean the air filters, fan, and the projector inside every 3 months, otherwise the elevated temperature will cause the projector shut down automatically.

7). Please ensure there are no obstacles around the projector to allow the projector to dissipating heat normally.

Note: Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Important reminder: When you replace the light bulb with a new one but the red light still flashes, it is not a problem with the bulb. You need to adjust the timer of the projector to zero

ProductSiteLaunchDate : 2025-01-10T11:14:33.415Z
RecommendedUsesForProduct : TV
RoomType : Any
Scent : Unscented
Size : Small
SpecificUsesForProduct : TV
Style : Casual
SupplierDeclaredDgHzRegulation : not_applicable
SupportedInternetServices : Sirius
SurroundSoundChannelConfiguration : 7 1 channel
UnitCount : 1
UnspscCode : 45111600
Voltage : 120 volts
WaterResistanceLevel : not_water_resistant
Wattage : 120 watts