Cart 2 india

Specification
Brand : CQDAXUMY
BulletPoint : Clamp to benders for additional leverage and control.
BulletPoint1 : Premium Texture: The spring pipe bender is made of oil-quenched and tempered spring steel, which can be restored to its original state after use. Galvanized surface, non-toxic, durable, not easy to rust, can be used indoors and outdoors.
BulletPoint2 : Variety of Sizes：Package contains 5 different outer diameters of Spring Tube Benders are offered to you, including 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, and 5/8-inch. suitable for most pipe sizes, which can satisfy your diverse demands.
BulletPoint3 : Practical Design：This Spring Tubing Bender is specially designed for bending thin wall tube to the precise angle(up to 180 degrees) without crimping or collapsing the pipe. It can slide tubing easily and the possibility of metal fatigue is less, can provide you a long-term service.
BulletPoint4 : Easy to use: Spring bender is a simple and effective way to bend thin-walled tubes, put the tube into the spring and bend it to the desired angle to take out, the bending effect is good, and effectively avoid bending damage to the copper tube
BulletPoint5 : Wide Application：These Spring Pipe Benders can be applied for copper pipe, aluminum pipe, thin-walled steel pipes, etc, which will bring a lot of convenience to your life; It is recommended that you use one bender over the tube and another bender inside the tube for a better result.
Color : Grey
ExternallyAssignedProductIdentifier : 5469228790776
ExternallyAssignedProductIdentifier1 : 686046556505
ExternallyAssignedProductIdentifier2 : 0686046556505
ExternallyAssignedProductIdentifier3 : 00686046556505
GpsrSafetyAttestation : 1
IncludedComponents : Spring Tubing Benders
ItemName : 10/15Pcs Spring Tubing Benders Kit for Pipe O.D. 1/4", 5/16", 3/8", 1/2", and 5/8", Tube Bender Set for Copper, Aluminum and Thin Wall Steel Tubing (15)
ItemPackageDimensions_Height : 27.7 centimeters
ItemPackageDimensions_Length : 6.4 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : ZZHYNHP
Material : Q235 Steel, #45 Steel
ModelName : Spring Tubing Benders Kit
ModelNumber : 200056271
NumberOfBoxes : 1
NumberOfItems : 15
PackageLevel : unit
PartNumber : FSH2
PowerSourceType : hand_powered
ProductDescription :

Description:

It can accurately control the bending angle and bending radius of the line pipe, so that the shape of the line pipe after bending is highly consistent with the design requirements. Accurately bend the line pipe into the required shape to ensure the normal functioning of the refrigeration system

Feature:

In the bending process, the spring bender on the line pipe to exert a more uniform force, can effectively avoid the line pipe due to local overstress, like denting, rupture and other damages, to ensure the quality and service life of the line pipe

Specification:

Texture: Steel

Specification: 1/4‘’, 5/16‘’, 3/8‘’, 1/2‘’, 5/8‘’

1/4‘’ Size:

Length: 204mm  

Inner Diameter: 6.9mm   

Suitable for 6mm copper tube

5/16‘’ Size:

Length: 207mm  

Inner Diameter: 8.3mm   

Suitable for 8mm copper tube

3/8‘’ Size:

Length: 206mm  

Inner Diameter: 10mm   

Suitable for 10mm copper tube

1/2‘’ Size:

Length: 206mm  

Inner Diameter: 13mm   

Suitable for 12mm copper tube

5/8‘’ size:

Length: 202mm  

Inner Diameter: 17mm   

Suitable for 16mm copper tube 

Note:

1. There may be slight differences between the picture and the actual color of the commodity.  We will try our best to show you the exact color.

2. Please allow slight dimension difference due to manual measurement.

ProductSiteLaunchDate : 2024-11-25T09:02:29.704Z
Size : 24*7.9*2.8inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 27000000