Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Acrylic Bender allows temperature adjustment through the thermostat, suitable for acrylic, organic board, PVC and various thermoplastic materials with a thickness no more than 6mm (0.24in)
BulletPoint2 : PVC Plastic Acrylic Bending Machine offers a heating length up to 300mm (12in)
BulletPoint3 : Acrylic Bender Machine features a safety water cooling design, ensuring no thermal deformation except where heating is needed
BulletPoint4 : Acrylic Heat Bender Tool is portable and lightweight, convenient to transport and use on the go
BulletPoint5 : 2pcs Acrylic Benders can be combined to heat from up and down for material with thickness more than 6mm (0.24in)
Color : Green
ExternallyAssignedProductIdentifier1 : 0753781809828
ExternallyAssignedProductIdentifier2 : 753781809828
GpsrSafetyAttestation : 1
IncludedComponents : 1 x Acrylic Bender 1 x Water Pump 1 x Thermostat 1 x Thermometer 2 x Silicone Tubes
IncludedComponents1 : 1* Rebar Tying Machine
IncludedComponents2 : 1* Charger
IncludedComponents3 : 2*Lithium Batteries (One Already Installed)
IncludedComponents4 : 1* Plier
IncludedComponents5 : 1* Toolbox,1* English Manual
ItemDisplayWeight : 0.34 pounds
ItemName : 110V Acrylic Bender, 300mm 12in Bending Machine, Plastic Acrylic Heat Bender, Manual Bending Strip heater for PVC Plastic Sheets, 1mm to 6mm Thickness
ItemPackageDimensions_Height : 56.4896 centimeters
ItemPackageDimensions_Length : 13.589 centimeters
ItemPackageDimensions_Width : 20.0914 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Generic
Material : Steel
Material1 : Plastic
Material2 : Steel
ModelName : 110V Acrylic Bender, 300mm 12in Bending Machine
ModelNumber : AB6926-30-6
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : AB6926-30-6
PowerSourceType : ac
ProductDescription :

SPECIFICATION

Input Voltage: AC 110V

Power: 300W

Heating Peak: 250℃

Heating Thickness: 1-6mm

Heating Width: max. 300cm (12in)

PACKAGE

1 x Acrylic Bender

1 x Water Pump

1 x Thermostat

1 x Thermometer

2 x Silicone Tubes

1 x Spare Heating Strip

How To Use

- Prepare a cooling tank with a capacity of at least 30L. Connect the heater and the submersible pump with the silicone hose. Place the submersible pump in the cooling water tank, turn on the pump power, and wait for water to circulate out. (Note: If the machine operates for a long time, the water temperature will continuously rise. Please replace with cold water promptly. Do not allow the circulating water temperature to drop suddenly. When the water temperature exceeds 50℃, promptly disconnect the power to the heater and replace the circulating water later.)

-When adjusting the temperature, avoid rotating too quickly to prevent damage to the temperature control components. (Note: Slowly adjust the thermostat until the heating tube turns slightly red. Excessively high temperatures can damage the heat bending material and affect the lifespan of the heat bender.)

ProductSiteLaunchDate : 2024-07-01T03:40:51.143Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27000000
Voltage : 110 volts_of_alternating_current
Wattage : 300 watts