Cart 2 india

Specification
Brand : DDYOOK
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : ‎silver
ExternallyAssignedProductIdentifier1 : 0756804436803
ExternallyAssignedProductIdentifier2 : 756804436803
GpsrSafetyAttestation : 1
IncludedComponents1 : 1 X Acrylic Pvc Bending Machine Heater
IncludedComponents2 : 1 X Water Pump
IncludedComponents3 : 2 X Silicone Tubes
IncludedComponents4 : 1 X Temperature Controller
IncludedComponents5 : 1 X Water Thermometer
ItemName : 49" Acrylic PVC Bending Machine Heater, 1500W Temperature Adjustable Manual Acrylic Plastic Sheet Bending Machine Heating Tool, 1mm-6mm Thickness for Decoration Engineering Sign Making
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 30 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Aongslank
ModelName : Acrylic PVC Bending Machine Heater
ModelNumber : HRTED48
NumberOfItems : 1
PartNumber : Pissentenmpef2ic3o
PowerSourceType : AC110V
ProductDescription :

escription:

Acrylic Hot Bending Machine Is Increasingly Widely Used In Decoration Engineering, Sign Making, Including Square Column, Door And Window Edge, Display Cabinet, Curtain Wall, Large Light Box, Etc.

Specifications:

Input Voltage: Ac 110V

Heating Peak: Zw-300-420 ℃, The Other 250 ℃

Heating Bending Thickness: 1-6mm

Heating Port Width: 8mm

Effective Heating Length: 1250 Mm/49in

Power:1500W

Product Size:Approx.135*4*4cm/53.1*1.6*1.6in

Net Weight:4kg

Package Dimensions (L x W x H): 147*20*12cm

Instructions:

1.Keep a Cooling Tank (Barrel) Of More Than 30 Liters. First, Connect The Heater Body And The Submersible Pump With a Silicone Hose. Place The Submersible Pump In The Cooling Bucket, Connect The Power Supply Of The Pump, And Wait For The Water To Circulate Out. (Note: The Water Temperature Of The Machine Will Keep Rising For a Long Time. Please Replace The Cold Water Clearly. The Temperature Of The Circulating Water Should Not Drop Abruptly. When The Water Temperature Exceeds 50 Degrees, The Power Supply Of The Heater Should Be Cut Off In Time, And The Circulating Water Should Be Replaced Later).

2.Connect The Thermostat With The Hot Bender And Connect It To 220V Power Supply. Adjust The Knob Of The Thermostat Controller. The Clockwise Direction Is To Raise The Temperature, And Vice Versa. When Adjusting, It Is Not Appropriate To Rotate Too Fast In Order To Avoid Damaging The Thermostat. (Note: It Is Advisable To Slowly Adjust The Thermostat To a Reddish Heat Pipe. Excessive Temperature Will Cause Damage To The Hot Bending Material And Affect The Service Life Of The Hot Bender).

3.When The Heating Pipe Reaches The Required Temperature, It Can Place The Plastic Sheet Which Needs To Be Hot-Bended On The Heating Trough. When The Sheet Is Soft Enough To Be Folded Manually, It Can Bend At Various Angles. According To The Different Materials, The Setting Time Is Different. Please Determine The Setting Time According To The Actual Situation.

ProductSiteLaunchDate : 2024-06-24T08:35:23.666Z
RegulatoryComplianceCertification : RSDOS.0494GA-004
Size : Approx.135*4*4cm/53.1*1.6*1.6in
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112500
Voltage : 110 volts
Wattage : 1500 watts