Cart 2 india

Specification
Brand : DNYSYSJ
BulletPoint1 : ✅【Excellent Strapping 8-34mm】 The applicable scope of steel strapping is 8-34 mm/0.3-1.3inch. This rebar tie gun allows you to pack rebars quickly and tightly. It takes only 0.8s at a time to knot. Save 3-5 times than manpower by hand.
BulletPoint2 : ✅【Easy to Carry】Rebar tier is a miniature motor tool has the trait of safety and credibility. Hand held machine used to pack rebars quickly. Compact size, lightweight, easy to grab.
BulletPoint3 : ✅【Easy to Operate】 No barrier between the mouth of the jaws and the wire when used. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
BulletPoint4 : ✅【Wide Application】 Rebar tier tool is used for building market, including civil building, floor pipe, steel bar tying, heating floor mesh, steel bar, etc.
BulletPoint5 : ✅【Chargeable】This tying machine comes with two lithium-ion batteries. Each battery takes 1.5 hours to be fully charged. Battery capacity: 4500 mAh; Voltage: 12V.
BulletPoint6 : Power source type: PowerSource
Color : Blue: 8-34mm
ExternallyAssignedProductIdentifier : 9330183754317
ExternallyAssignedProductIdentifier1 : 0785869975262
ExternallyAssignedProductIdentifier2 : 785869975262
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat11 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat12 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat13 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat14 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat15 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat16 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat17 : JP_SmallLithiumIonBatteryWithEquipment
Hazmat18 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat19 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat21 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat22 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat23 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat24 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat25 : US_SmallLithiumIonBatteryWithEquipment
Hazmat26 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat27 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat5 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat6 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat7 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat8 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat9 : CN_SmallLithiumIonBatteryWithEquipment
IncludedComponents : Oil Can x 1
ItemName : DNYSYSJ Automatic Rebar Tying Machine 12V Electric Rebar Bender Handheld Rebar Tier Steel Strapping Machine with 2 Batteries (Blue: 8-34mm)
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 24 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
ItemVolume : 500 milliliters
Manufacturer : GANLI
Material : Aluminum alloy
ModelName : Electric Hydraulic Rebar Cutter
ModelNumber : RC-16
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : GANLIML
PowerSourceType : ac
ProductDescription : Specifications
Material: Plastic + Metal
Voltage: 12V
Battery: Lithium Ion; Capacity: 4500 mAh
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm; Length: more than 110 m
Steel Strapping: 8mm-34mm
Knot Wire Length: 300-500mm
Knot Number Per Charge: 1500 times
Knot The Required Time: 0.8 seconds at a time
Machine Size: 10.83"x2.56"x9.45"(appr.)
Tool box size: 16.54inx11.81inx3.94in

Tying Wire Installation
1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
3. Insert the head of the wire guide into the tap pipe until it is resisted.
4. Cover the plate and fasten the locking piece.
5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.
Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.

Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off). Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back.
4. When the binding process is not completed, do not unplug the machine in advance.
ProductSiteLaunchDate : 2021-08-13T01:58:39.285Z
Size : 12in/300mm
Style : 1000W RC-16
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27000000