Cart 2 india

Specification
Brand : CooFel
BulletPoint1 : 1.0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 7/8" (6 to 22 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55掳), 7/8" / 22 mm #7 Rebar(0-90掳). It is able to satisfy your various bending demands.
BulletPoint2 : 2.1200W Pure Copper Coil Motor: This portable rebar bender features a 1200W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent.
BulletPoint3 : 3.Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing.
BulletPoint4 : 4.Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position.
BulletPoint5 : 5.One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Color : Orange
ExternallyAssignedProductIdentifier : 9152675565283
ExternallyAssignedProductIdentifier1 : 0736963651019
ExternallyAssignedProductIdentifier2 : 736963651019
IncludedComponents : as shown
ItemName : Electric Hydraulic Rebar Bender, 1.2 KW 0.9 inch 22 mm Hand Held Rebar Bender 110 V Portable Electric Rebar Bender, within 5 s
ItemPackageDimensions_Height : 35 inches
ItemPackageDimensions_Length : 55 inches
ItemPackageDimensions_Width : 22 inches
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : CooFel
Material : metal
ModelName : CooFel-DAI-15
ModelNumber : CooFel-DAI-15
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : GDFGFBHGVB
PowerSourceType : ac_dc
ProductDescription : Highlights:
1.0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 7/8" (6 to 22 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55掳), 7/8" / 22 mm #7 Rebar(0-90掳). It is able to satisfy your various bending demands.
2.1200W Pure Copper Coil Motor: This portable rebar bender features a 1200W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent.
3.Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing.
4.Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position.
5.One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.

Details:
1200W Electric Rebar Bender 1/4'' to 7/8" Rebar Diameter & 0-90 Degrees & 5 Seconds The hydraulic electric rebar bender can bend 1/
ProductSiteLaunchDate : 2025-03-10T09:52:16.141Z
Style : modern
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 25
UnspscCode : 27112700