Cart 2 india

Specification
Brand : Joshua Roth
BulletPoint : The hooks and jacks are all steel construction and are coated with red vinyl plastic to cushion the branch and minimize scuffing.
BulletPoint1 : Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 100mm.
BulletPoint2 : This metal letter angle bender must be fixed in the usage to improve efficiency due to many operations.
BulletPoint3 : This metal letter bending tool adopts screw rod clamp type, you’d better not fix the metal too tight, otherwise will reduce the tool’s service life.
BulletPoint4 : If you want to bend thicker metal or you need attain standard 90 degree angle, please make a slot at first with our CS-MBBT-001 metal slot bending machine.
BulletPoint5 : If the distance between two angles is less than 10cm, but plus the distance between the third angle is more than 10cm, you can bend the third angle first, and then bend the second angle, so that you can avoid in-operation situation.
Color : Silver
ExternallyAssignedProductIdentifier : 7627592904078
ExternallyAssignedProductIdentifier1 : 0705181017006
ExternallyAssignedProductIdentifier2 : 705181017006
FinishType : Finish
GpsrSafetyAttestation : 1
IncludedComponents : 1*Bending Bender 2*Molds 3*Pins
ItemName : Joshua Roth 170 Branch Bender Small
ItemPackageDimensions_Height : 21.9 centimeters
ItemPackageDimensions_Length : 4.7 centimeters
ItemPackageDimensions_Width : 10.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Joshua Roth Limited
Material : Steel
MetalType : spring steel
ModelName : SBG-40 Heavy-Duty Metal Universal Bender
ModelNumber : SBG-40
NumberOfItems : 1
PartNumber : SIC-20939
PowerSourceType : hand_powered
ProductDescription : Branch benders, often referred to as levers, are used when a trunk or branch, in addition to being wired, must have additional pressure to bend it slowly into a different position. Actually, the bender works as a combination vise-lever, moving the branch or trunk until it reaches the desired position. Our five sizes of Branch Benders accept maximum branch diameters of 5/8” to 1 1/4”. The hooks and jacks are coated with red vinyl plastic to cushion the branch and minimize scuffing. #170 Small is approx. 2 1/4" x 2 1/2"
ProductSiteLaunchDate : 2017-04-19T07:00:00.000Z
Size : 202x17mm/ 206x13mm/ 206x10mm/ 207x8.3mm/ 204x6.9mm
Style : As Picture Shown
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 56101600