SpecificationBrand : Oiveinya
BulletPoint1 : ★【Build to Last】 It is made of 45# steel through a spray molding process, with high strength, high hardness, and good cor-ro-sion re-sis-tance, ensuring a long service life.
BulletPoint2 : ★【Adjustable Bending Angle】 It provides you with a large range (within 190°) of bending angle. You can use specific angles within this range to complete your workpiece.
BulletPoint3 : ★【Wide Compatibility】 With a maximum steel rod bending diameter of 0.47in, you have a wide variety of workpiece options. It is not only suitable for steel, copper, iron, stainless steel, and aluminum pipes but also for wires with a diameter of less than 0.2in.
BulletPoint4 : ★【Easy Bending】 You just need to place the metal rod to be bent (not included) in the correct position to start bending, it's very easy to get started.
BulletPoint5 : ★【Thoughtful Design】 The sliding bushing makes work easier by reducing re-sis-tance during bending and protecting the surface of the steel rods (not included) from scr-atches.
BulletPoint6 : Can Be Combined with the Worktable into a Hot Bending Machine, Can Also Be Used Alone.
BulletPoint7 : There Is Water Circulation Cooling on Both Sides of the Heating Tube to Ensure That There Will Be No Thermal Deformation Except Where Heating Is Needed.
Color : Black
ExternallyAssignedProductIdentifier1 : 0756804449735
ExternallyAssignedProductIdentifier2 : 756804449735
IncludedComponents : 1* Metal Bending Machine<
IncludedComponents1 : 1 X Acrylic Pvc Bending Machine Heater
IncludedComponents2 : 1 X Water Pump
IncludedComponents3 : 2 X Silicone Tubes
IncludedComponents4 : 1 X Temperature Controlle
IncludedComponents5 : 1 X Water Thermometer
ItemName : Manual Bending Machine,Maximum Bending Angle 190 Heavy-duty Manual Rebar Bender Metal Bending Machine for Flat Steel and Steel Rod
ItemPackageDimensions_Height : 4.7 inches
ItemPackageDimensions_Length : 57.87 inches
ItemPackageDimensions_Width : 7.87 inches
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : GydsgorUS
Material : 45# Steel
ModelName : Bending Machine
ModelNumber : /
NumberOfItems : 1
PartNumber : 1
PowerSourceType : /
ProductDescription :
Description
This metal bending machine is capable of bending a wide range of materials efficiently. 45# steel and spray molding process makes it sturdy, cor-ro-sion-re-sis-tant, and long-lasting. With a simple structure and extended handle, you can easily operate this machine. It can be used to handle most types of workpieces and achieve the bending results you want.
Details
Round Corner: Compared with traditional square corners, the arc design can better ensure safety during installation and use.
Practical Handle: The ergonomic extended handle provides a comfortable grip and reduces hand fatigue.
Sturdy Base: The bottom is secured with two screws, which ensures smooth bending and less wobbling.
Application
It can be used to bend steel, copper, aluminum, iron, stainless steel, and a variety of other metal rods into desired shapes within an angle range of 190°. It can also be applied to wires with a diameter of less than 0.2in.
Specifications
Material: 45# Steel
Color: Black
Process: Spray Molding
Style: Modern
Assembly Require: Yes
Operation Mode: Manual
Suitable Materials: Steel, Copper, Aluminum, Iron, Stainless Steel, Wires Less Than 5mm/0.2in Diameter
Bending Angle: 190°
Maximum Bendable Diameter of Steel Rod: 12mm/0.47in
Gross Weight: 2kg/4.41lbs
Net Weight: 1.5kg/3.31lbs
Product Size: 56*3*6cm/22.05*1.18*2.36in
Package Size: 43*11*6cm/16.93*4.33*2.36in
Package Included
1* Metal Bending Machine
Notes
1. Please check the size carefully before ordering.
2. You need to be sure that you mount it in a sturdy vice (not included) to prevent it from slipping.
3. Please note that this product does not contain items such as steel rods.
ProductSiteLaunchDate : 2024-07-10T06:47:07.774Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112500