Cart 2 india

Specification
Brand : RABEEXP
BulletPoint1 : 【High Quality】: This bending bender is made of hardened steel and pre-oiled for maximum strength and corrosion resistant life.
BulletPoint2 : 【Easy to Install】: It is predrilled with 3/8 inch (1cm) diameter holes, so you can easily mount it on your workbench or clamp it in a vise.
BulletPoint3 : 【Easy to Use】: It uses a 12 inch (30.5 cm) long lever handle that uses the bar principle to make your job very easy.
BulletPoint4 : 【Sufficient Accessories】: The package contains 3 pins that can be used as stoppers or torque pins when bending and forming different designs.
BulletPoint5 : 【Wide Application】: This bending bender can be used with mild steel bars and non-hardened flat and round materials. It can bend bars up to 5/16 inch (8 mm) in diameter and flat metals up to 1-1/8 inch (30 mm) in diameter. It is suitable for making clamps, handles, brackets, hooks, coils, etc. with metal wires, flat metals and tubing.
Color : One Color
ExternallyAssignedProductIdentifier : 7504375421857
IncludedComponents : SET
ItemName : RABEEXP Metal Bending Bender Manual Pipe Bender with 2 Molds for Bars Up to 8 mm in Diameter and Flat Metal Up to 30 mm SBG-40 Blue
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : RABEEXP
ModelName : Bending Bender
ModelNumber : SBG-40
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 4001017413244
PowerSourceType : hand_powered
ProductDescription :

It may be difficult to find parts in the shape you need in the store, so your work is blocked time and time again. Then, you definitely need this bending bender. It discards the gearbox of the hand-crank bender and is much lighter in size. It is ideal for use during construction, allowing you to achieve twice the work with half the effort.

Multiple Use: The package contains two different types of molds, giving you the freedom to make different curve sizes in the same design.

Sufficient Accessories: The package contains 3 pins that can be used as stoppers or torque pins when bending and forming different designs.

3.94 inch Rubber Plastic Comfort Grip: The end of the lever handle features a 3.94 inch rubber plastic comfort grip to give you a better feel without getting tired easily.

Round Head Clamping Workpiece: The machine uses a double round head to clamp the workpiece, which is very easy to use for a better clamping effect.

Specification

Model: SBG-40

Material: Steel

Color: Blue+Black

Flat Steel Capacity: 30* 8 mm/1.18*0.315inch

Round Steel Capacity: 15.8 mm/0.62inch

Square Steel Capacity: 15 mm/0.59inch

Lever Handle Length: 30.5 cm/12inch

Pre-drilled Hole Diameter: 1cm/ 3/8inch

Rubber Plastic Comfort Grip Length: 10cm/3.94inch

Applicable Material: Bars Up to 5/16 inch (8 mm) in Diameter and Flat Metal Up to 1-1/8 inch (30 mm)

Gross Weight: 24 kg/52.9lbs

Package Included

1*Bending Bender

2*Molds

3*Pins

Notes

Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2025-04-23T05:33:45.273Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112500