Cart 2 india

Specification
Brand : YSHUSTGY
BulletPoint1 : BASIC PARAMETERS---Input voltage: AC100-240V; Output voltage: 12.8V; Tying diameter range: 0.31’’-1.33’’/8-34mm; Battery: 4400mAh; Times a knot: 0.8S, 38-42 knots in 1 minute; Time to fully charged: 1.5h; Wire length: 360ft per coil; Machine weight: 3.2lb.Compact Size, Lightweight, Easy to Grab.
BulletPoint2 : SUPER FAST KNOTING---The operation of the automatic rebar tier is quite easy. It only takes 0.8s to finishing a knot, saving you a lot of time and effort. The rechargeable battery takes only 1.5 hours to fill and can be used for 3000 knots or 8 hours when fully charged.It Can save 3-5 Times than Man Power by Hand.
BulletPoint3 : AUTOMATIC CUTTING---Rebar Tier Is a Hand Held Machine Used to Pack Rebars Quickly. When the knotting is finished, the rebar tie gun automatically cuts the wire and prepares for the next knotting with high efficiency. If you encounter the wire stuck at the exit, you can use the pliers in the package to pull it out, complete with accessories.
BulletPoint4 : 8-34mm APPLICATION RANGE--- It Is a Miniature Motor Tool Has the Trait of Safety and Credibility. This reba tie tool can easily knot rebar with a total diameter of 0.3 to 1.3 inches. It can be widely used in construction sites, farms, garden fence repair and other places. If you encounter unsolvable problems such as wire jams during use, please contact us freely.
BulletPoint5 : USE TIPS---When operating the rebar tying machine, the machine head needs to be perpendicular to the steel bar plane. You must hear a beep sound before you can release the button. Use the “+ ”key to increase the binding strength. You can pratice several times before use.Reasonable Structure, Advanced Craft, Simple and Convenient Operation, High Efficiency and Convenient Maintenance.
Color : Orange
ExternallyAssignedProductIdentifier1 : 0765477104681
ExternallyAssignedProductIdentifier2 : 765477104681
GpsrSafetyAttestation : 1
IncludedComponents1 : 1* Rebar Tying Machine
IncludedComponents2 : 1 Roll* Tying Wire (Already Installed)
IncludedComponents3 : 1 Pair* Pliers
IncludedComponents4 : 1* Adapter
IncludedComponents5 : 2* Batteries 1* Toolbox 1* English Manual
ItemName : Rebar Tie Automatic Rebar Tier Gun 4400 MAh Steel Tying Machine 8-34mm Bar Tie Tool 0.31’’-1.33’’ Tightness Adjustable Rechargeable 12.8V in Tools & Home Improvement Rebar Cutters & Benders
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 30 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : YanHoumy
Material : Plastic, Steel
ModelName : 3160-US-1
ModelNumber : OT-MLLCR
NumberOfItems : 1
PartNumber : Pissentenmpef2ic3o
PowerSourceType : NO
ProductDescription :

Specifications

Color: Orange

Material: Plastic + Metal

Voltage: 12v

Battery: Lithium Ion Batteries

Battery Capacity: 4500 Mah

Battery Charging Time: 1.5 Hours Full Filling

Tying Wire Diameter: 0.8mm

Tying Wire Length: More than 110 M

Applicable Scope of Steel Strapping: 8mm - 34mm

Knot Wire Length: 300 - 500mm

Knot Number per Charge: 1500 Times

Knot the Required Time: 0.8 Seconds at a Time

Machine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.)

Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch)

 

Operation Instructions：

1. the Rebar Tirer's Jaws Are Stuck to the Intersection of the Steel Bars, and the Steel Bars Are Hooked at 45 Degree Angles.

Note: There Can Be No Barrier Between the Mouth of the Jaws and the Wire.

2. Press the Start Switch, the Rebar Tirer Machine Carries on the Work (Spins, Hinges Tightly, Cuts off)

Note: Press One Button at a Time, Do Not Probe the Jaws at Work.

3. When Automatic Completion, the Jaw from the Steel bar Intersection and Then Pull Back, Complete the Process and Prepare for the Next Binding.

4. When the Binding Process Is Not Completed, Do Not Unplug the Machine in Advance, Otherwise It Will Cause the Bundling of the Goods Tied Skidding.

 

Operating Skills：

1. in Use, the Left Tilt 45 Degrees After Banding, the Next Time the Banding into a Right Tilt 45 Degrees Banding, Left and Right Alternately Banding.

2. When the Machine Is About to Tighten, the Machine Will Appear Slightly Shaking, While Holding the Hand of the Machine Not Too Tight, You Can Relax Properly.

 

 Package Included:

1x Tying Machine

1x Pliers

1x Charger

1x Storage Box

2x Lithium Ion Batteries

1x Tying Wire in the Machine (Tying Wire Standard: About 0.8 Mm X 110 M/Roll)

ProductSiteLaunchDate : 2024-08-05T07:48:04.208Z
RegulatoryComplianceCertification : RSDOS.0494GA-004
Size : Approx.135*4*4cm/53.1*1.6*1.6in
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 1500 watts