Cart 2 india

Specification
Brand : Hegebeck
BulletPoint1 : 【Parameter】- Shank Diameter: 1/2-inch; Total Length: 130mm/5.1-inch to 150mm / 5.9-inch; Bit Diameter: 32mm / 1.26-inch; Material: High Speed Steel 4241 (HSS-4241); Hardness (HRC): 62-63 HRC; Surface Treatment: Polished.
BulletPoint2 : 【Material】- This reduced shank drill Bit was made by High Speed Steel which is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
BulletPoint3 : 【Advantage】- Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge. Design of reduced shank can expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
BulletPoint4 : 【Wide Application】- Designed for fast drilling in concrete, masonry, artificial stone, and rockDesign for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
BulletPoint5 : 【Please Note】- To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
CuttingAngleString : 118.0 degrees
FinishType : Polished
GpsrSafetyAttestation : 1
ItemName : Hegebeck 1-1/4" Reduced-Shank Drill Bit High Speed Steel Stainless Steel Drill Bit with 1/2" Straight Shank for Home DIY and General Building Engineering and Woodworking
ItemPackageDimensions_Height : 22.606 centimeters
ItemPackageDimensions_Length : 3.7084 centimeters
ItemPackageDimensions_Width : 4.9022 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : reduced-shank-drill-bits
Manufacturer : Hegebeck
Material : Carbide
Material1 : Stainless Steel
Material2 : High Speed Steel
ModelNumber : GU0201Z2101MU-FBA
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : GU0201Z2101MU-FBA
ProductDescription : Hegebeck Reduced-Shank Drill Bit

Specifications:
Material: HSS-4241
Dimensions: Cutting diameter: 32mm/ 1-1/4inches; Shank Diameter: 1/2 inches; Total length: 150mm / 5.9 inches
Color: Sliver
HRC: 62-63

Description:
1.High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
2.Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
3.When drilling, conditionally add coolant or cutting fluid to cool down to reduce the damage of high temperature to the drill bit and extend the service life of the drill bit.
4.Cutting speed should not be too high, to prevent burning, rate should not be too large, to prevent the drill wear.

Package Content:
1 pcs x Reduced-Shank Drill Bit

ProductSiteLaunchDate : 2021-08-27T09:04:48.774Z
Size : 32mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Stainless Steel,Steel
SurfaceRecommendation1 : Wood
SurfaceRecommendation10 : Ceramic
SurfaceRecommendation11 : Glass
SurfaceRecommendation12 : Pine
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Plastic
SurfaceRecommendation4 : Concrete
SurfaceRecommendation5 : Masonry
SurfaceRecommendation6 : Stone
SurfaceRecommendation7 : Cast Iron
SurfaceRecommendation8 : Iron
SurfaceRecommendation9 : Brass
UnitCount : 1
UnspscCode : 27111700