Cart 2 india

Specification
Brand : ILOPM
BulletPoint1 : Simple calibration and operatio
BulletPoint2 : Approved by strict quality & safety standards
BulletPoint3 : Adjustable focus and clearly defined scale, with large easy-to-read measurements
BulletPoint4 : Uses subtle and comfortable non-slip rubberized grip, separates test solution from body heat
BulletPoint5 : Auto Temperature Compensation (ATC), increase accuracy and eliminates concerns on temperature
Color : No Box
ExternallyAssignedProductIdentifier : 7505705268647
ItemName : Refractometer Held Tester Tool 4 In 1 Antifreez Refractometer Freezing Point Urea Battery Fluid Glass Water Tester Tool Refractometer Enhanced Precision(No Box)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-refractometers
Manufacturer : ILOPM
Material : metal
ModelName : 2022080922
ModelNumber : 2022080922
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 2022080922
ProductDescription : Description:
Adblue: 30% ~ 35%, Dividing value: 0.2%, Accuracy: ±0.2%
Propylene Glycol: -50 to 0 , Dividing value: 1, Accuracy: ±0.5
Battery Fluids: 1.10-1.40SG, Dividing value: 0.01, Accuracy: ±0.01
Ethylene Glycol: -50 to 0 , Dividing value: 1, Accuracy: ±0.5
Cleaning Fluids: -40 to 0 , Dividing value: 5, Accuracy: ±5
USE:
1. Align the Cover Plate with light, adjust the Focus Adjustment until you see the scale clearly.
2. Calibration: Accurate Measurement depends on careful calibration. Please make sure the ambient temperature is about 68 °F, distilled water can be used to calibrate.
A. Open the Cover plate. place 2-3 drops of the distilled water on the prism, then close the cover plate and make sure the water spread aross the prism without any air bubbles or dry spots. wait for about 30 seconds to let the reading to stabilize. Look into eyepiece and turn the calibration screw with the screw driver until the reading is "0"
3. Clean the prism with soft cloth, then place 2-3 drops of the liquid sample to be tested on the prism.then close the cover plate and make sure the water spread aross the prism without any air bubbles or dry spots. wait for about 30 seconds to let the reading to stabilize. Align the prism assembly with the light source. look into eyepiece and you can get the reading.
4. Please leep the refractometer dry and clean in the box, which can make sure the reading accuracy and durable.
Package include :

1 x Refractometer
1 x Pipette
1 x Screw driver
1 x Cleaning cloth
1 x Box
ProductSiteLaunchDate : 2024-09-24T06:12:47.955Z
Size : 1
UnitCount : 1
UnspscCode : 27000000