Cart 2 india

Specification
AirGunPowerType : Spring-Piston
Brand : Aopkeo
BulletPoint1 : Max Input Pressure: 1500psi; Output Pressure: 20psi ~ 200psi adjustable; Input Thread: G1/2-14. With free hexagon wrench.
BulletPoint2 : Improved responsiveness: The optimized design not only improves reliability but also enhances response speed, allowing for rapid pressure recovery during use. The pressure is continuous and stable during continuous shooting.
BulletPoint3 : Versatile compatibility: Compatible with standard HPA, LP, and SLP air tanks, fit G1/2-14 thread valve or regulator. Its aluminum alloy and stainless steel construction ensures durability and performance.
BulletPoint4 : Streamlined production: By redesigning the body of the Micro Reg, the manufacturer has made it possible to use the same piston as the UGS and CGS air systems. This change has simplified the production process and reduced assembly time, while maintaining the same level of performance.
BulletPoint5 : Compact design: Low profile design stands less than 2.26"/57.5mm tall resulting in the entire regulator being more compact than a traditional UFA.
BulletPoint6 : Reliable output: The SS MR Gen 2 Micro Regulator can produce pressures of 20psi on the low end of the adjustment range and 200psi on the high end. Adjustable output pressure from 20psi to 200psi (standard configuration).
BulletPoint7 : Included fill valve cover prevents dirt and debris from building up in the in the fill valve
Color : Black
Department : Unisex-Adult
ExternallyAssignedProductIdentifier : 00843388101071
ExternallyAssignedProductIdentifier1 : 810154242443
ExternallyAssignedProductIdentifier2 : 0810154242443
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : no
ItemDisplayWeight : 0.52 pounds
ItemName : Aopkeo Adjustable Compressed Air Regulator Dual Gauge Pneumatic Air Valve Input 4500psi, Output 0 to 3000psi, M18*1.5, 5/8"-18UNF for Paintball Airsoft PCP (M18*1.5)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : paintball-regulators
Manufacturer : Aopkeo
Material : Aluminum
ModelName : HPA regulator
ModelNumber : M18*1.5
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : NINJAREG45K
Pattern : Solid
ProductDescription : How to use: 1. Install the regulator on the cylinder/tank. 2. Rotate the adjustment screw to turn off the output. At this point, the output pressure is 0. 3. Filling the cylinder. 4. Use a hex wrench to turn the adjustment screw and observe the pressure gauge above, which will display the value of the output pressure. 5. After use, completely close the adjustment screw to set the output pressure to 0. Then remove the adapter.
ProductSiteLaunchDate : 2024-11-28T01:33:36.200Z
Size : One Size
Style : Ultralite Ninja 4.5K Regulator
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 40141600
WarrantyDescription : 6 month warranty
WarrantyDescription1 : 1 Year Manufacturer Warranty
WarrantyDescription2 : Please Contact Customer Service on the Ninja Paintball Website