Cart 2 india

Specification
Brand : BEIST OUTDOOR
BulletPoint : SR450E-580 REGULATORVY DUTY
BulletPoint1 : ✔️【Versatile Compatibility】Compatible with standard HPA, LP, and SLP air tanks, fit G1/2-14 thread valve or regulator. Its aluminum alloy and stainless steel construction ensures durability and performance.
BulletPoint2 : ✔️【Adjustable Pressure】Max Input Pressure: 1500psi; Output Pressure: 20psi ~ 200psi adjustable; Input Thread: G1/2-14. With free hexagon wrench.
BulletPoint3 : ✔️【Compact Design】Low profile design stands less than 2.26"/57.5mm tall resulting in the entire regulator being more compact than a traditional regulator.
BulletPoint4 : ✔️【Improved Responsiveness】The optimized design not only improves reliability but also enhances response speed, allowing for rapid pressure recovery during use. The pressure is continuous and stable during continuous shooting.
BulletPoint5 : ✔️【Reliable output】The SS MR Gen 2 Micro Regulator can produce pressures of 20psi on the low end of the adjustment range and 200psi on the high end. Adjustable output pressure from 20psi to 200psi (standard configuration).
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 0768447130000
ExternallyAssignedProductIdentifier2 : 768447130000
ImportDesignation : Imported
IncludedComponents1 : the Regulator
IncludedComponents2 : ‎the Hexagonal Wrench
ItemDisplayDimensions_Height : 7 inches
ItemDisplayDimensions_Width : 7.25 inches
ItemName : BEIST OUTDOOR CO2 Regulator with 8mm Female for Paintball PCP Airsoft CO2 Tank Cylinder Regulator & Adapter DIY Kit Adjustable Range 0~200psi, 0~800psi Optional (0~200psi)
ItemPackageDimensions_Height : 18.5 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 8.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : paintball-regulators
Manufacturer : BEIST
Material1 : Aluminum Alloy
Material2 : ‎Stainless Steel
ModelName : HPA-Reg
ModelNumber : 0697694056330
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 0697694056330
Pattern : Solid
ProductDescription : we can only ajust the pressure start with 0 psi up to how much you want it(the max. ajustable pressure is 200psi),the pressure will refresh when you shot once .(we can not ajust the pressure from high to low) Important-In order to prevent the gauge from exploding during installation,please follow the instructions. 1,Turn the knob clockwise until the adjusting lever is completely relaxed, so that the regulator is closed. 2,Then screw the regulator to the HPA bottle. 3,After installation, you can tighten the knob in clockwise direction, so that you can adjust the pressure you need.But please keep the pressure below 300psi, otherwise the pressure gauge will break. Turning the knob clockwise is tighten and increase psi; Turning the knob counterclockwise is loose,but will not decrease pressure, just let pressure return zero Please pay attention: The top quick disconnect size is 8mm. it can only be a single time, can't continuous for this regulator. It must wait the pressure drop to 0 psi. Input Pressure: 800-1000 psi.
ProductSiteLaunchDate : 2023-08-30T09:03:41.312Z
Size : 0~200psi
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 49000000
WarrantyDescription : No Warranty