Cart 2 india

Specification
Brand : PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
BulletPoint1 : This Brass Safety Valve Is Preset At 215 PSI And Has a Flow Rate (SCFM) Of 182
BulletPoint2 : This Safety Valve Is Made In The USA
BulletPoint3 : This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
BulletPoint4 : Please Note 1/8" NPT Measures 0.405" Outside thread diameter in inches. See attached NPT Thread chart.
BulletPoint5 : Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
Color : Gold/Yellow
ConnectorType : Ptf Sae Spl Short
ExteriorFinish : Silicone
ExternallyAssignedProductIdentifier1 : 098268450408
ExternallyAssignedProductIdentifier2 : 098268571493
ExternallyAssignedProductIdentifier3 : 0098268450408
ExternallyAssignedProductIdentifier4 : 0098268571493
ExternallyAssignedProductIdentifier5 : 00098268450408
GpsrSafetyAttestation : 1
IncludedComponents : 1/2" Lead Free* Water Service Vacuum Relief Valves
ItemDisplayDimensions_Length : 3.5 inches
ItemName : Brass, 1/8" NPT Industrial Soft Seat Safety Pressure Relief Valve, Made In The USA (215 PSI / 182 SCFM)
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 0.5 inches
ItemPackageQuantity : 1
ItemShape : Straight
ItemTypeKeyword : industrial-relief-valves
Manufacturer : Conrader
Material : Brass
MaximumOperatingPressure : 215 pounds_per_square_inch
ModelName : LFN36M1
ModelNumber : SRV250-18
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : SRV250-18
PressureRange : 110 pounds_per_square_inch
ProductDescription : A soft seat safety relief valve typically uses an elastomer material, such as Silicone or Viton. The sealing material in the internals of the valve will depend on the compatibility of media flowing through the valve. This Safety Valve is NOT adjustable. This Safety Valve Is Preset at 215 PSI And Has a Flow Rate (SCFM) Of 182. Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. The valves are not deemed "Lead Free". The soft seat safety valve (SRV-Series) has an elastomer seal. Set Pressure Tolerance: +2 psig up to and including 70 psig, +3% of set pressure greater than 70 psig. Operating Temperature Range: -65 degrees Fahrenheit to 400 degrees Fahrenheit. Materials of Construction: Seat, Cap, Piston: ASTM B16 Brass Spring: 17-7 Stainless Steel Seal: Silicone or Viton. Certifications: ASME Boiler & Pressure Vessel Code Section VIII Division 1 CSA B51 Boiler, Pressure, Vessel, and Pressure Piping Code
ProductSiteLaunchDate : 2022-06-02T17:59:27.127Z
Size : 1/8" PTF SAE
SpecificationMet : ASME
SpecificationMet1 : UL
SpecificationMet2 : FM
StreetDate : 2017-04-11T00:00:01Z
Style : 215 PSI / 182 SCFM
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : safety relief valve