Cart 2 india

Specification
Brand : PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
BulletPoint : Honeywell SmartLamp Dual Lamp Ultraviolet Air Treatment System - UV100E2009/U UV100E-8
BulletPoint1 : This Brass Safety Valve Is Preset At 200 PSI And Has a Flow Rate (SCFM) Of 395
BulletPoint10 : Valve Installation Torque 30 - 35 lbf ft Adjustment Screw
BulletPoint2 : This Safety Valve Is Made In The USA
BulletPoint3 : This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
BulletPoint4 : Please Note 3/8" NPT Measures 0.675" Outside thread diameter in inches. See attached NPT Thread chart.
BulletPoint5 : Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
BulletPoint6 : Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.@1000 psi
BulletPoint7 : Response Time - Typical 10 ms
BulletPoint8 : Adjustment - No. of CW Turns from Min. to Max. setting 5
BulletPoint9 : Valve Hex Size 7/8 in.
ConnectorType : Screw
Department : Backflow
ExteriorFinish : Metal
ExternallyAssignedProductIdentifier1 : 737733023302
ExternallyAssignedProductIdentifier2 : 0737733023302
IncludedComponents : Fetco 1057.00044.00 Fill Valve, S53, .75Gpm, 240V Exp
ItemName : Brass, 3/8" NPT Industrial High Flow Hard Seat Safety Pressure Relief Valve, Made In The USA (200 PSI / 395 SCFM)
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 16.764 centimeters
ItemPackageDimensions_Width : 16.002 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : Conrader
Material : Brass
Material1 : Brass
Material2 : Bronze
MaximumOperatingPressure : 200 pounds_per_square_inch
ModelNumber : SRH375-38
MountingType : Chassis Mount
NumberOfItems : 1
NumberOfPorts : 6
OperationMode : Automatic
PartNumber : SRH375-38
ProductDescription : A hard seat safety relief valve is a metal-to-metal seated valve, which usually uses a metal disc or ball as the internal sealing surface against the orifice or internal passageway in a safety relief valve. Hard seat safety relief valves are excellent in corrosive or extremely high temperature applications. This Hard Seat Safety Valve is NOT adjustable. This Safety Valve Is Preset at 200 PSI And Has a Flow Rate (SCFM) Of 395. Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. SRH-series safety valves have a metal-to-metal seal and are designed and certified to ASME Code specifications. Also available with the “CE” mark to meet the requirements of the Pressure Equipment Directive of the European Union. The valves are not deemed "Lead Free". Set Pressure Tolerance: +2 psig up to and including 70 psig, +3% of set pressure greater than 70 psig. Operating Temperature Range: -65 degrees Fahrenheit to 400 degrees Fahrenheit. Materials of Construction: Seat, Cap, Piston: ASTM B16 Brass Spring: 302 Stainless Steel Sealing Ball: 440 Stainless Steel. Certifications: ASME Boiler & Pressure Vessel Code Section VIII Division 1 CSA B51-03 Boiler, Pressure, Vessel, and Pressure Piping Code. Please view product cut sheets and flow chart on the pictures attached to this listing.
ProductSiteLaunchDate : 2022-06-03T08:09:02.476Z
SpecificationMet : ASME
Style : 200 PSI / 395 SCFM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : safety relief valve
Wattage : 0.1 watts