Cart 2 india

Specification
Brand : DERNORD
BulletPoint : Great Product
BulletPoint1 : Tri Clamp:1-1/2 Inch; Ferrule Size: 50.5mm
BulletPoint2 : Adjustable Pressure：0.5-3.5 Bar
BulletPoint3 : Rotating racking arms are an integral part of any fermentation system involving conical fermenters or brite tanks
BulletPoint4 : A spring-loaded bunging valve is used to prevent tanks and vessels being over pressurized in the food, beverage, chemical & pharmaceutical industries
BulletPoint5 : Manual release is possible by pulling the spindle via the spherical top knob
Color : Gold
ConnectorType : Threaded
Department : unisex-adult
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 697285235779
ExternallyAssignedProductIdentifier2 : 0697285235779
IncludedComponents : Temperature & Pressure Relief Valve
ItemName : DERNORD SS304 Sanitary 1.5" Tri Clamp Adjustable Pressure Relief Safety Valve with Pressure Gauge
ItemPackageDimensions_Height : 38.1 centimeters
ItemPackageDimensions_Length : 17.8054 centimeters
ItemPackageDimensions_Width : 37.9984 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : DERNORD
Material : Stainless Steel
MaximumOperatingPressure : 270 pounds_per_square_inch
ModelName : NCLX-LX
ModelNumber : SRV250-14
NumberOfItems : 1
PackageLevel : unit
PartNumber : DERNORD-1296
ProductDescription :
Product Features

A spring-loaded bunging valve is used to prevent tanks and vessels being over pressurized in the food, beverage, chemical & pharmaceutical industries. DERNORD bunging valves come with an adjustable nut to set the release pressure, which is usually set higher than the operating pressure and will open when pressure inside the tank/vessel exceeds this preset. Additionally, manual release is possible by pulling the spindle via the spherical top knob. Cleaning of the valve may become necessary if expunged debris interferes with the valve from seating fully to form an air tight seal.


Installation & Use

The pressure relief bunging valve should be installed in a vertical orientation and is designed to relieve gases only. After installation, please overpressure it to calibrate before first use. If any liquid product comes in contact with the relief valve during operation, a thorough cleaning will be required to maintain consistent pressure relief. After liquid has evaporated from the PRV after cleaning, repeat overpressure to properly calibrate the valve for use.

ProductSiteLaunchDate : 2022-10-21T02:20:14.922Z
Size : One Size
SpecificationMet : ASME
Style : 270 PSI / 230 SCFM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : safety