Specification Brand : Garosa BulletPoint1 : Low-wear piston construction for easy operation and low air consumption, no internal self-lubricating. BulletPoint2 : No water hammer, water hammer (water impact) is absorbed when fluid flows from under the valve stem, flowing rate is 30% larger than the ordinary angle seat valve. BulletPoint3 : The gas head can be rotated 360 degrees, and even the limit switch can be rotated 360 degrees. Easy to install one to two limit switches BulletPoint4 : Optional smaller control head when fluid flows in from above the valve stem, built-in metal connector for easy connection BulletPoint5 : Visual position indication, can connect limit switch or emergency manual devices, stem PTEE sealing to prevent from being introduced. ExteriorFinish : Metal,Plastic,Stainless Steel ItemName : Garosa Pneumatic Steam Valve, Air Actuated Thread Angle Seat Valve, PTEE Sealing, Stainless Steel Thickened Plastic Case Steam Valve(3/4 DN20) ItemPackageDimensions_Height : 21.3 centimeters ItemPackageDimensions_Length : 7.6 centimeters ItemPackageDimensions_Width : 9.8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : industrial-relief-valves Manufacturer : Garosa Material : Stainless Steel MaximumOperatingPressure : 225 pounds_per_square_inch ModelNumber : SS-RL3S4 NumberOfItems : 1 NumberOfPorts : 2 PartNumber : Garosaaem5h8s7nb-12 ProductDescription :
Specification: Item Type: Angle Seat ValveMaterial: Stainless steel, plastic Standard(optional): DN15 (1/2in), DN20 (3/4in) Connection Form: Thread Pressure Environment: Atmospheric Pressure Use: Commutation Bore Diameter: 50mm Spool Sealing: PTFE Stem Sealing: PTFE/FKM Piston Sealing: FKM/NBR Applicable Medium: Water, Neutral Gas or Liquid, Alcohol, Oil, Organic Solvent, Weak Acid or Weak Alkaline Solution Medium Temperature: PTFE: -10 ~ +180 Ambient Temperature: -10 ~ +60 Viscosity: Up To 600mm²/S Control Medium: Air/Neutral Gas Control Pressure Range: 0.3-1MPa Widely Used: Beer and beverage, textile printing and dyeing, pharmaceutical and food processing, rubber machinery, organic or inorganic chemicals, high temperature sterilization, water/sewage treatment