Cart 2 india

Specification
Brand : HWBWE
BulletPoint1 : 【Build to Last】It is made of high-quality vermicular graphite cast iron with a phosphating process, which is durable and lightweight, and not easy to rust and corrode, so it can withstand the test of time.
BulletPoint2 : 【Powerful Function】 It can adjust the flow rate from 0-16 GPM to optimize system efficiency and avoid overload or energy waste, and can speed up or slow down the motor. Once set, it will maintain a constant speed even with variations of loads. The excess flow will be returned to the tank or used to power another function.
BulletPoint3 : 【Economical and Practical】 With it, you can prevent system overload and reduce energy consumption by limiting the maximum flow rate as well as precisely controlling the flow rate, helping improve overall energy efficiency.
BulletPoint4 : 【Convenient to Use】Once you receive the product, you can install it directly into the tractors without additional assembly, which is very convenient and time-saving.
BulletPoint5 : 【Easy to Clean】 Thanks to its smooth surface and simple construction, you can wipe the surface clean of stains with a damp rag.
Color : Black
Department : Unisex Adult
ExteriorFinish : Phosphated Cast Iron
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier : 7394564265184
ExternallyAssignedProductIdentifier1 : 0704674732433
ExternallyAssignedProductIdentifier2 : 704674732433
IncludedComponents : 1* Hydraulic Adjustable Variable Flow Control Valve
ItemName : Hydraulic Adjustable Variable Flow Control Valve w/Relief Hydraulic for Small Tractors,Tractor Loaders 0-16 GPM, 1/2 NPT
ItemPackageDimensions_Height : 4.15 inches
ItemPackageDimensions_Length : 6.3 inches
ItemPackageDimensions_Width : 5.51 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : HWBWE
Material : Cast Iron
MaximumOperatingPressure : 3000 pounds_per_square_inch
ModelName : Hydraulic Directional Control Valve
ModelNumber : LKF-60
NumberOfItems : 1
NumberOfPorts : 3
PartNumber : KACOME
ProductDescription :

Details

Burr-free Edges: Smooth, burr-free edges are not only comfortable to touch, but also care for your skin.

 

Practical Knob: It helps you to regulate the flow more easily.

 

Application

It is suitable for small tractors, tractor loaders, log splitters, environment vehicles, light-loading machines, and so on. It is used to stop or start a hydraulic motor or cylinder.                                 

 

Ports

IN: Inlet Port

CF (Controlled Flow): Flow coming from this port is pressure compensated and proportional. Flow can vary from closed to fully open depending on the position of the lever.

EX (Excess Flow): Flow coming from this port is pressure compensated. If the lever is set to 0 all flow will exit the valve from this port.

 

Specification

Material: Vermicular Graphite Cast Iron

Surface Treatment: Phosphating

Color: Black

Model: LKF-60

Assembly Required: No

Nominal Diameter: 15mm/0.59in

Nominal Pressure: 21MPa

Nominal Flow Rate: 0-60L/15.85Gal/min       

Adjustable Flow Rate: 0-16 GPM

Port Size: 1/2" NPT

Maximum Working Pressure: 3000 PSI            

Product Size: 11.5*4.8*14.7cm/4.53*1.89*5.79 in

Gross Weight: 3.9kg/8.6lbs

Package Size: 16*14*10.5cm/6.3*5.51*4.13in

 

Package Included

1* Hydraulic Adjustable Variable Flow Control Valve

 

Notes

1.Please note that the EX Port must be plumbed back into the tank for the relief valve to operate.

2.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-05-10T06:29:06.105Z
Size : Valve with Gauge
SpecificationMet : ASME, ASTM, ANSI, MSS SP 72
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Globe Valve