Cart 2 india

Specification
Brand : WANSUPYIN
BulletPoint1 : Big Holes, Easy To Connect With Wires.
BulletPoint2 : Wide Voltage, For Lights / Motors / Garage / Fan / Diy.
BulletPoint3 : 300m Remote Range, 433mhz Stable Signal.
BulletPoint4 : Working Voltage: AC90~250V.
BulletPoint5 : Package Included: 1 X Receiver.
CompatibleDevices : Air Conditioner
ConnectivityTechnology : Bluetooth
ControllerType : Button Control
ItemName : Wireless Remote Control Switch 2CH Relay Receiver AC 90V-250V for Garage Door
ItemPackageDimensions_Height : 2.5 centimeters
ItemPackageDimensions_Length : 7.5 centimeters
ItemPackageDimensions_Width : 5.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : audio-video-remote-control-extenders
Manufacturer : WANSUPYIN
MaximumRange : 1 feet
NumberOfItems : 1
PartNumber : WSUSF104800000
ProductDescription : Features:
Big Holes, Easy To Connect With Wires.
Wide Voltage, For Lights / Motors / Garage / Fan / Diy.
300m Remote Range, 433mhz Stable Signal.
Working Voltage: AC90~250V.
Package Included: 1 X Receiver.

Specifications:
Working Voltage: AC90~250V
Working Temperature: -30℃ - +70℃
Receiving Sensitivity: -117dbm
Support Encoding: Leaning Code
Receiving Range: Open Space Is 300 Meters
Batteries: ‎1* 12V 27A Battery(Battery Included)
Remote Operating Mode: Momentary Mode / Toggle Mode / Latched Mode
Load Power: 500W

Working Modes:
You Can Set Up In 3 Modes: Momentary Mode,Toggle Mode And Latched Mode.
Momentary Mode:
Press And Hold A Button, 1st Relay Will Work; Release A Button,1st Relay Will Stop.
Press And Hold B Button, 2nd Relay Will Work; Release B Button, 2nd Relay Will Stop.
Toggle Mode:
Press A Button, 1st Relay Will Work; Press A Button Again, 1st Relay Will Stop.
Press B Button, 2nd Relay Will Work; Press B Button Again, 2nd Relay Will Stop.
Latched Mode:
Press A Button, 1st Relay Will Work; Press B Button, 1st Relay Will Stop, 2nd Relay Will Work. Press A Button Again, 2nd Relay Will Stop, 1st Relay Will Work

Set Up:
Momentary Mode:
Press Learning Button Once, Press A Button Once, Succeed.
Toggle Mode:
Press Learning Button Twice, Press A Button Once, Succeed.
Latched Mode:
Press Learning Button 3times, Press A Button Once, Succeed.
Clean Data:
Press Learning Button 8times, The Data Will Be Cleaned. All Remotes Cannot Control This Receiver.

Package Included:
1 X Receiver
1 X Remote Control
ProductSiteLaunchDate : 2024-09-04T10:50:25.647Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 1
UnspscCode : 52161500
WarrantyDescription : 1