Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 20X the power, improving the link qu ty and coverage of ce fied WLAN devices.
BulletPoint2 : 2.5dB ultra-low noise.
BulletPoint3 : Wide 6-16V operating input .
BulletPoint4 : Working with ce fied IEEE 802.11b/g/n wirel LAN devices.
BulletPoint5 : Simply plug and play, no software is required.
CompatibleDevices : Router
ConnectorType : RJ45
DataTransferRate : 2.4 GHz
FrequencyBandClass : dual_band
FrequencyBandsSupported : 2.4 GHz
IncludedComponents1 : Cable
IncludedComponents2 : Instruction manual
ItemName : Generic 4W 4000mW 802.11b/g/n WiFi Wirel Amplifier Router 2.4Ghz WLAN ZigBee BT Signal Booster with an TDD
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 12.5 centimeters
ItemTypeKeyword : network-repeaters
Manufacturer : Generic
PartNumber : PT-XVUSZQX240318-C2082
ProductDescription : with time-division du ing(TDD) method of WLAN and using rapid micro detection technology to provide high rity amplification. The signal booster can work with most WLAN/WiFi devices, BT, ZigBee and increase the signal strength, therefore a larger WLAN coverage and more stable transmission rate.

Specifications:
Frequency : 2.4-2.5GHz
Operating vol e: 6-16V
Receiving gain: 10dB±1
Transmission gain: 13dB±1
Input power: 3dBm(min), 20dBm(max)
Max output power(P1dB): 36dBm(4W)
EVM: 3％@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC ply t: 435mA @ Pout 28dBm 9V
Noise figure: ＜2.5dB
TX/RX switch time delay: ＜1us
LED indicator: : green, : red
Operating ambient temperature: -40℃~70℃
Operating humility: Up to 95％ rel. hu ity
Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)
Item weight: 181g / 6.39oz
Package size: 21 * 12.5 * 5cm / 8.26 * 4.92 * 1.96in (L * W * H)
Package weight: 381g / 13.43oz

Applications:
Wirel LAN 802.11b/g/n acc point clients.
Based on the 2.4GHz WLAN wirel base stations.
Based on the 2.4GHz WLAN wirel bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, BT p col wirel devices.

Installation Instructions:
Step1: Disconnect the power ply to AP/Router.
Step2: Detach the an from your ce fied wirel AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the an to the end of the booster.
Step5: Connect the power ply to the booster first and subsequently the AP/Router.

Package List:
1 * 4W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi an
1 * User manual (En sh)
ProductSiteLaunchDate : 2024-03-18T03:06:19.434Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43220000
WirelessCommStandard : 802_11_BGN