Cart 2 india

Specification
Brand : Fuator
BulletPoint1 : COMPATIBILITY MODEL: Fuator are a professional manufacturer of 09985 pressure canner sealing ring are a just as flexible as the originals, for Pressure Cooker 0178107 ( 23 qt) 0178209 ( 23 qt) 0178410 ( 23 qt) 0175107 ( 18 qt) 0175510 ( 16 qt) 0174510 ( 16 qt).
BulletPoint2 : MATERIAL PREMIUM QUALITY: This 09985 Sealing ring is made of food-grade silicone material. This silicone material have a strong Flexibility and sealing, will not deform after heating, long service life.
BulletPoint3 : NO NEED TO WORRY ABOUT STEAM LEAKS: Pressure cooker for canning sealing ring fits around the pressure cooker inside rim of the cover and forms a pressure-tight seal between the cover and the body of the Pressure cooker during canning and cooking.
BulletPoint4 : EASY TO INSTALL: pressure cooker parts sealing ring replacement method, before installation, thoroughly clean the gasket grooves, Insert the sealing gasket into the high-pressure pot cover and press firmly into the slot to use.
BulletPoint5 : KIND TIPS: 09985 Pressure canner sealing ring only fits Pre/sto pressure cooker models, It is recommended to replace it every two to three years If there is shrink, harden, deform, crack, loose, worn or pitted, should be replaced immediately to maintain optimal performance.
Capacity : 23 quarts
CareInstructions : Hand Wash
Color : black
ControllerType : Mechanical knob
ControlMethod : touch
ExternallyAssignedProductIdentifier : 7509149331295
ExternallyAssignedProductIdentifier1 : 0700973626756
ExternallyAssignedProductIdentifier2 : 700973626756
FinishType : Glossy
GpsrSafetyAttestation : 1
IncludedComponents : 2pcs
IsAssemblyRequired : 1
IsDishwasherSafe : 1
ItemName : Fuator 09985 for Pressure Canner Sealing Ring Replacement with Overpressure Plug Fits 01781 01782 01784 01751 01755 01745 Pressure Cooker 16 18 23 Quart Pressure Canner Gasket Parts
ItemPackageDimensions_Height : 30.099 centimeters
ItemPackageDimensions_Length : 1.8034 centimeters
ItemPackageDimensions_Width : 15.3924 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pressure-cooker-replacement-parts
Manufacturer : TOPINCN
Material : Silicone
ModelName : 23QT
ModelNumber : 09985-123QT
NumberOfItems : 5
OperationMode : Manual
PartNumber : 09985-123QT
ProductDescription :

COMPATIBILITY MODEL

Fuator is a professional manufacturer of 09985 pressure canner sealing rings are just as flexible as the originals, for Pressure Cooker 0178107 ( 23 qt) 0178209 ( 23 qt) 0178410 ( 23 qt) 0175107 ( 18 qt) 0175510 ( 16 qt) 0174510 ( 16 qt)

Installation Steps

1. Remove the old sealing ring and the overpressure plug. (The overpressure plug is under the handle on some models.)

CAUTION: To ensure safe operation and satisfactory performance from your pressure cooker, replace the automatic air vent every time you replace the sealing ring, or sooner if it becomes hard or inflexible.

2. Clean the sealing ring groove and the air vent opening thoroughly. Be sure they are free of all food particles and foreign material.

3. Wash the new sealing ring in warm soapy water, rinse, and dry. Install the sealing ring by working it into the cover a small section at a time until it is fully in place. Any excess amount of sealing ring can be worked into the cover in this manner.

4. If necessary, to help make the cover easier to open and close, a very light coating of cooking oil may be applied to the underside of the body lugs and sealing ring.

5. To install the overpressure plug. Push the round side of the rubber plug (marked TOP) into the opening from the underside of the cover.

6. When putting the cover on the body, press one hand down on the area opposite the handle. This will help compress the sealing ring and make the cover easy to lock in place. Then, open and close the cover several times to make it operate more freely.

ProductSiteLaunchDate : 2024-08-14T08:28:56.464Z
Size : 1 Pack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43191600