Cart 2 india

Specification
Brand : Equalizer
BulletPoint1 : EasyPunch is designed to remove rivet stems with the hammering device built into the EasyPunch, which is delivered with a simple push on the handle.
BulletPoint2 : Eliminates the need for hammering. Not for use on steel rivets.
BulletPoint3 : When removing door glasses that are held in place by pop rivets you must drill the rivets out. Before you can drill the rivets out, however, you need to remove the rivet stems.
BulletPoint4 : To use, simply push on the handle. When depressed 1/2 inch, the spring-loaded punch releases, delivering enough force on the rivet stem that it begins to back out.
BulletPoint5 : After a quick series of punches, the stem is removed and you can begin to drill.
Color : B
CompatibleDevices : Projector
CompatibleWithVehicleType1 : Motorcycle
CompatibleWithVehicleType2 : ATV
CompatibleWithVehicleType3 : UTV
ConnectorType : 12v Auxiliary Power Outlet
CoreMaterial : Copper
ExternallyAssignedProductIdentifier : 7687930410623
ExternallyAssignedProductIdentifier1 : 0889944083757
ExternallyAssignedProductIdentifier2 : 889944083757
FitType : Universal
IncludedComponents : Plug Wire Separator
ItemDisplayDimensions_Length : 3.03 inches
ItemDisplayWeight : 5 pounds
ItemName : Equalizer AEP1132 • EASYPUNCH™ is Designed to Remove Rivet Stems with The hammering Device Built into The EasyPunch™
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-riveters
Manufacturer : Equalizer Industries
Material : Steel
ModelName : Wire Sets
ModelNumber : 306C
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
OeManufacturer : JEGS
OemEquivalentPartNumber : 80574
PartNumber : EQ-AEP1132
ProductDescription : EasyPunch is designed to remove rivet stems with the hammering device built into the EasyPunch, which is delivered with a simple push on the handle. Eliminates the need for hammering. Not for use on steel rivets. When removing door glasses that are held in place by pop rivets you must drill the rivets out. Before you can drill the rivets out, however, you need to remove the rivet stems. To use, simply push on the handle. When depressed 1/2 inch, the spring-loaded punch releases, delivering enough force on the rivet stem that it begins to back out. After a quick series of punches, the stem is removed and you can begin to drill.
ProductSiteLaunchDate : 2023-08-07T06:52:37.923Z
Size : 7.70X1.90X0.45CM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500