Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : INTSUPERMAI
BulletPoint1 : 【Parameter】 Model: C4, Impact energy: 10j, Air consumption: 21L/S, Impulse frequency: 32/min, Cylinder diameter: 25mm, Trachea inner diameter: 13mm, Shovel head tail handle: 17*60mm, Noise: 102dB
BulletPoint10 : Relay Puller Pliers Handle Adopts Anti Slip And Insulation Design, Which Is Conducive To Disassembling And Installing Fuses And Relays.
BulletPoint2 : 【High Performance】Thickened sheet, more durable.Strong spring, not easy to break deformation, effectively reduce vibration. With C4 type air shovel, strong impact. Can shovel can be riveted, dual function.
BulletPoint3 : 【Pressure】The use of air pressure should be maintained at 0.3-0.35 MPA, the gas path should be set up filter network, constant pressure valve, oil mist.
BulletPoint4 : 【Lubricating Oil】The work should pay attention to adding lubricating oil, generally 3-4 hours to add such as lubricating oil once a week. Should be disassembled and cleaned once, long-term stop use should be added grease, properly placed.
BulletPoint5 : 【Note】The coordination between the tail of the shovel head and the cylinder liner should meet the requirements and be avoided when used. No brazing, if there is swelling at the end of the brazing head (or rivet head), it should be repaired to the standard size in time.
BulletPoint6 : Hose Removal Pliers Removal Diameter 0.16"(4mm）- 0.59"(15mm) ，5/32" - 1/2" Vacuum and Fuel Hoses.
BulletPoint7 : Hose Removal Pliers Stubborn Hoses That Can Remove Fuel Tanks, Radiators, Pumps, Air Filters, Power Pipes, Heat Dissipation Oil Pipes, And Water Pipes.
BulletPoint8 : Relay Puller Pliers Removing Electrical Relays On The Car.
BulletPoint9 : Relay Puller Pliers Design Of Thin Tips and Biased Handles Is Beneficial For Dismantling Relays In Narrow Spaces.
ExternallyAssignedProductIdentifier1 : 0840403736362
ExternallyAssignedProductIdentifier2 : 840403736362
FitType : Universal
GpsrSafetyAttestation : 1
IncludedComponents : Shown in the picture
ItemName : INTSUPERMAI Pneumatic Brake Shoe Riveting Machine Brake Pad Riveting Machine Pneumatic Brake Pad Shovel and Riveting Machine
ItemPackageDimensions_Height : 42.91 inches
ItemPackageDimensions_Length : 17.72 inches
ItemPackageDimensions_Width : 11.22 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-riveters
Manufacturer : INTSUPERMAI
Material : Alloy Steel Carbon Steel
Material1 : Stainless Steel
Material2 : Carbon Steel
ModelName : automotive-power-steering-tools
ModelNumber : A80149-BDA61324
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : Y033151
ProductDescription : Parameters:
Model: C4
Impact energy: 10j
Air consumption: 21L/S
Impulse frequency: 32/min
Cylinder diameter: 25mm
Trachea inner diameter: 13mm
Shovel head tail handle: 17*60mm
Noise: 102dB

Repair and maintenance：
1. The use of air pressure should be maintained at 0.3-0.35 MPA, the gas path should be set up filter network, constant pressure valve, oil mist.
2. The coordination between the tail of the shovel head and the cylinder liner should meet the requirements and be avoided when used. No brazing, if there is swelling at the end of the brazing head (or rivet head), it should be repaired to the standard size in time.
3.The work should pay attention to adding lubricating oil, generally 3-4 hours to add such as lubricating oil once a week. Should be disassembled and cleaned once, long-term stop use should be added grease, properly placed.

Features：
1. Thickened sheet, more durable.
2. Strong spring, not easy to break deformation, effectively reduce vibration.
3. With C4 type air shovel, strong impact.

Item included:
1*Brake shoe riveting machine (033151)

ProductSiteLaunchDate : 2025-06-10T18:08:02.572Z
SpecificUsesForProduct : Gripping, Removing
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31162200
WarrantyDescription : 12 Months