Cart 2 india

Specification
Brand : Ken Forging
BulletPoint1 : Melted And Manufactured In The USA
BulletPoint2 : Forged For Ultra Strength
BulletPoint3 : Machined With Black Oxide Finish
BulletPoint4 : Country Of Origin: United States
BulletPoint5 : Adopting a large hexagonal seating surface
BulletPoint6 : Equipped with mud and water resistant rubber sleeves
ExternallyAssignedProductIdentifier : 7430988735947
ExternallyAssignedProductIdentifier1 : 637400156640
ExternallyAssignedProductIdentifier2 : 0637400156640
ExternallyAssignedProductIdentifier3 : 00637400156640
IncludedComponents : Rod Ends
ItemName : Ken Forging 3A-B7MACH-UNF Rod Ends, 3/8-24" x 3-1/2"
ItemPackageDimensions_Height : 0.81 inches
ItemPackageDimensions_Length : 3.87 inches
ItemPackageDimensions_Width : 0.81 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rod-end-bearings
Manufacturer : Ken Forging
Material : Outer - Carbon Steel, Ball - 52100 Alloy Steel
MeasurementSystem : Metric
ModelNumber : 3A-B7MACH-UNF
NumberOfItems : 1
PartNumber : 3A-B7MACH-UNF
ProductDescription : The structure of the spherical joint at the rod end is to use high-precision bearing steel balls on the ball surface, which are wrapped by die casting to form the gripper and connected to the handle neck through special welding. Through this innovative manufacturing method, the mirror of the steel ball is replicated onto the spherical part of the gripper, making full contact with each other. Therefore, smooth motion with minimal obstacles has been achieved. The BL model maintains sufficient strength and a very compact shape due to its highly balanced design. Therefore, this model is most suitable for use in car height sensor connection parts or transmission control parts. Due to the fact that the sphericity of the steel ball used in the bearing is replicated to the spherical part with the ball handle neck, smooth motion can be achieved with minimal division (sphericity of 0.001m), resulting in good operability and sensation in the movement of the connecting rod mechanism. Its gripper uses high-strength zinc alloy and is connected at right angles to the ball bearing connecting rod. Due to the installation of grease bags above and below the spherical surface, it has good lubrication and excellent wear resistance.
ProductSiteLaunchDate : 2012-08-30T20:31:52.530Z
Size : 3/8-24" x 3-1/2"
SpecificationMet : ISO 9001
StreetDate : 2017-11-29T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27000000