Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Specifications: Number of Teeth: 15; Bearing Model: 6000ZZ; Outside Diameter: 49mm / 1.93-inch; Bump Width: 8mm / 0.31-inch; Total Width: 22mm / 0.87-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 5mm / 0.2-inch; 1 x Idler Sprocket
BulletPoint2 : Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
BulletPoint3 : The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
BulletPoint4 : The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
BulletPoint5 : Widely used in milling machine, drilling machine or other machinery transmission occasions.
Color : Black
ExternallyAssignedProductIdentifier1 : 0778957564929
ExternallyAssignedProductIdentifier2 : 778957564929
ItemName : uxcell Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 06B Chains
ItemPackageDimensions_Height : 13.4 centimeters
ItemPackageDimensions_Length : 3.3 centimeters
ItemPackageDimensions_Width : 8.9 centimeters
ItemTypeKeyword : roller-chain-sprockets
Manufacturer : uxcell
Material : carbon steel c45
ModelNumber : a21120100ux0251
NumberOfItems : 1
PartNumber : a21120100ux0251
ProductDescription : Features:
1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.

Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 15
Bearing Model: 6000ZZ
Outside Diameter: 49mm / 1.93-inch
Bump Width: 8mm / 0.31-inch
Total Width: 22mm / 0.87-inch
Bore Diameter: 10mm / 0.39-inch
Pitch: 3/8-inch / 9.525mm
Tooth Width: 5mm / 0.2-inch

Package Content: 1 x Idler Sprocket
ProductSiteLaunchDate : 2021-12-29T09:41:36.742Z
SupplierDeclaredDgHzRegulation : not_applicable