Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Bonsing
BulletPoint1 : 【UNIVERSAL ROOF RACK】 This kayak roof rack fits round, oval, and square types of load bars, up to 4-1/3 inch (11cm) in width. 2 center holes design allows the mounting bolts to pass through easily. without scratching the roof of your car.
BulletPoint2 : 【SECURE AND DURABLE】Black powder-coated kayak rack tubes are rust-proof. Durable frames reliably handle up to 165 lbs. /pair of weight, soft foam pads on the frame protect the kayak or canoe when you load on your car’s roof.
BulletPoint3 : 【180°ADJUSTABLE】 The kayak J-bars come with a cam lever that allows you to adjust it into the upright position to 180 degrees. You can also flatten or folds the roof rack to reduce roof height for convenience portably.
BulletPoint4 : 【EASY TO INSTALL】This J-Cradle is supplied with carriage bolts and stainless steel rustproof nuts and 2x10ft straps to install safely on the load bars.
BulletPoint5 : 【MULTIPLE CARRIER】Versatile kayak roof carrier fits any watercraft, boat, ski, SUP, paddleboard on the car top.
Color : BLACK
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : SUV
CompatibleWithVehicleType3 : Van
CompatibleWithVehicleType4 : Trailer
ExternallyAssignedProductIdentifier1 : 855265004313
ExternallyAssignedProductIdentifier2 : 0855265004313
ExternallyAssignedProductIdentifier3 : 00855265004313
IncludedComponents1 : (2) Pulley Brackets
IncludedComponents2 : (2) Hangers
IncludedComponents3 : (2) Lift Straps
IncludedComponents4 : (1) Pulley Rope
IncludedComponents5 : (1) Hardware Kit, (1) Instruction Manual
IsAssemblyRequired : 1
IsFoldable : 1
ItemName : Bonsing Kayak Roof Rack, Foldable and Universal Mounting Kayak Racks for Roof Rack Rooftop Kayak Carrier for SUV Cars
ItemPackageDimensions_Height : 56.134 centimeters
ItemPackageDimensions_Length : 28.956 centimeters
ItemPackageDimensions_Width : 30.226 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : automotive-kayak-racks
LoadCapacity : 165.0 pounds
Manufacturer : Bonsing
Material : Stainless Steel
Material1 : Plastic
Material2 : Alloy Steel
ModelName : Kayak Hammock™ Deluxe Hoist System
ModelNumber : MPG346
MountingType : Roof Mount,Foldable
NumberOfItems : 2
PackageLevel : unit
PartNumber : KRK01
ProductDescription :

SPECIFICATION:

• Material: Powerd CoatedIron Tube
• Net Weight: 11 lbs / pair
• Capacity: 165 lbs

PACKAGE:

• 1 x Instruction Manual
• 2 x Brackets
• 2 x 10ft Tie Down Straps
• 4 x Nuts
• 4 x Carriage Bolts
• 4 x Flat Washers

INSTALL STEPS:

• 1.  Unfold the rack, turn the 2 adjustable levers, then adjust it into the upright position, then lock levers on both sides.
• 2.  Put the rack on the cross-bars, make sure rack ends don’t hang over the ends of the cross-bars. Attach rack with hardware, insert 2 bolts through the base pad, attach metal plate, washer, and then knob nut, tighten knobs on each bolt to secure the rack.
• 3.  Load and center the kayak on the rack, attach one end of the strap to the kayak front and place the buckle close to the kayak. Pass the other end of the strap through the bottom of the crossbar and then and tighten the strap with a buckle together.

Size : One Size
Style : Folding J-Bar / 1 pair
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : Limited Lifetime Warranty