Cart 2 india

Specification
Brand : Forney
BulletPoint : Gorilla Waterproof Caulk Silicone Sealant
BulletPoint1 : Length: 4" (101.6mm)
BulletPoint2 : Tensile strength: 18-pounds
BulletPoint3 : Material: nylon 6
BulletPoint4 : Temperature rating: -40⁰ to 185⁰
BulletPoint5 : UL listed: Yes
Color : Natural
ExternallyAssignedProductIdentifier1 : 032277620018
ExternallyAssignedProductIdentifier2 : 0032277620018
ExternallyAssignedProductIdentifier3 : 00032277620018
IncludedComponents : SILICONE
IncludedComponents1 : 100-pack
IncludedComponents2 : cable ties
ItemForm : Gel
ItemLength : 4 inches
ItemName : 6.6 Nylon. 18 lbs. Tensile Strength.
ItemPackageDimensions_Height : 20.2 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rope-caulk
LiquidVolume : 10 fluid_ounces
Manufacturer : Forney
Material : Nylon
MaximumGapFill : 0.5 inches
ModelName : Forney
ModelNumber : 62001
NumberOfItems : 1
NumberOfPieces : 100
PartNumber : 62001
ProductDescription : Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is & resistant. This clear silicone sealant won't yellow, shrink or crack over time! **Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure. TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal. TO USE: All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C). 1) Insert into cartridge gun. 2) Apply sealant, pushing bead ahead of nozzle. 3) Smooth bead immediately after application, before skin forms. 30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs. STORAGE: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured. CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.
ProductSiteLaunchDate : 2016-11-16T16:14:54.128Z
Size : 4 Inch
Style : Zip
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Window
TemperatureRange : 5 degrees_celsius
TensileStrength : 18 pounds
UnitCount : 1
UnspscCode : 39121703
WaterResistanceLevel : waterproof