Cart 2 india

Specification
Brand : Oodles of Noodles
ExternallyAssignedProductIdentifier1 : 099965370846
ExternallyAssignedProductIdentifier2 : 0099965370846
ItemForm : Foam
ItemName : Foam Pre-Caulking Filler Rope Backer Rod Roll Bulk, 2500 Feet Length x .5 Inch Width, Grey Filler Rope
ItemPackageDimensions_Height : 19 inches
ItemPackageDimensions_Length : 40 inches
ItemPackageDimensions_Width : 19 inches
ItemTypeKeyword : rope-seals
Manufacturer : Fill-Rite
NumberOfItems : 1
PartNumber : FR-1-2-INCH
ProductDescription : Backer Rod is a closed cell, resilient, polyethylene backer rod used as a backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants. Sealants will not adhere to it; no bond breaker is required. Composition and Materials: Our Backer Rod is a round, resilient, extruded closed cell polyethylene backer rod with a water resistant outer skin. It is compatible with most known cold applied sealants such as urethane, silicone, acrylic, butyl, polysulfides, latex, and chinking sealants. Specific Uses Include: Expansion joints Highway joints Glazing Log home chinking Parking Decks Curtain Walls Coping joints Isolation joints Temporary joint seal Limitations: Backer Rod should be installed with a roller or blunt, flat-sided tool. Please follow sealant manufacturer specifications for recommended sealant width and depth ratio. For best results, do not puncture, fold or overly stretch the product. The product is made with a water-resistant outer skin, therefore where moisture resistance is important, care should be taken not to puncture this outer surface skin. Installation: Joint or opening must be free of all contaminants, loose materials, dry and free of frost. Select correct rod size for joint width. With a blunt instrument or roller, seat Backer Rod to depth recommended by sealant manufacturer. Technical Data: Backer Rod is chemically inert and will resist gasoline, oil, and most solvents. Product will not stain or adhere to sealants. Density: 1.3-1.9 lbs/ft3 Water Absorption: less than 0.5% by volume< 0.03 grams/cc Temperature range: -90"F to 190"F Compression Recovery: > 90% Compression Deflection: 5 psi Tensile Strength: > 29 psi Meets standards ASTM D5249 type 3 and ASTM C1330 type C Box Sizes: 1/4 inch - 4000 feet length 1/2 inch - 2500 feet length 3/4 inch - 1100 feet length 1 inch - 600 feet length
ProductSiteLaunchDate : 2018-10-22T02:08:29.168Z
SurfaceRecommendation : Window, Door, Sink
TensileStrength : 29 pounds_per_square_inch
UnitCount : 1
UnspscCode : 31201606
WaterResistanceLevel : water_resistant