Cart 2 india

Specification
Brand : Bosch
BulletPoint : Bosch BIT ROTARY HMR DRL 3/4X8X10IN HCFC2224
BulletPoint1 : Specification: Diameter: 1.75mm / 0.07"; Full Length: 38mm / 1.5"; Flute Length: 17mm / 0.67"; Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC
BulletPoint2 : Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc.
BulletPoint3 : For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications
BulletPoint4 : Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle
BulletPoint5 : Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates
BulletPoint6 : 8 inch drilling depth
BulletPoint7 : 10 inch overall length
Color : ?Silver
Configuration : configuration
CustomerPackageType : 1
CuttingAngleString : 90 degrees
ExternallyAssignedProductIdentifier1 : 000346280722
ExternallyAssignedProductIdentifier2 : 0000346280722
ExternallyAssignedProductIdentifier3 : 00000346280722
ExternallyAssignedProductIdentifier4 : 00000346000016
FinishType : Bright
GpsrSafetyAttestation : 1
IncludedComponents : BIT ROTARY HMR DRL 3/4X8X10IN
ItemDisplayDimensions_Height : 15 inches
ItemDisplayDimensions_Length : 15 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 2.48 pounds
ItemLength : 9.75 inches
ItemName : Bosch HC2224 Wild Bore Head SDS-plus Shank Bit 3/4 x 10 x 12-Inch
ItemPackageDimensions_Height : 0.508 centimeters
ItemPackageDimensions_Length : 33.02 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemPackageQuantity : 1
ItemShape : Shape
ItemTypeKeyword : rotary-hammer-drill-bits
Manufacturer : Bosch
Material : Carbide
ModelNumber : HC2224
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : HC2224
ProductDescription : Specification:
Diameter: 1.75mm / 0.07"
Full Length: 38mm / 1.5"
Flute Length: 17mm / 0.67"
Material: Solid Carbide (Tungsten Steel)
Features: Hardened to 50 HRC
Finish: Fine Grinding
Package: 2 Pcs x Solid Carbide Drill Bits

Description:
1. Widely Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber and other similar materials.
2. Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
3. Solid Carbide Tool offers long tool life and faster cutting speeds than other substrates, but is more brittle.
4. Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
5. Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.
ProductSiteLaunchDate : 2004-07-02T00:01:00-00:00
Size : 1.75mm
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum,Stainless Steel,Copper,Cast Iron,Steel
SurfaceRecommendation1 : Concrete
SurfaceRecommendation2 : Masonry
SurfaceRecommendation3 : Stone
UnitCount : 1
UnspscCode : 27112800